Microbeast Plus 3-axis control unit for model helicopters

Microbeast Plus 3-axis control unit for model helicopters

Microbeast Plus is a 3-axis control unit for model helicopters without auxiliary rotor plane (paddle and paddle bar). Latest generation MEMS sensors measure every rotational movement of the aircraft with unprecedented precision and transmit it in real time to the control system. The housing in plastic composite construction keeps the weight sensationally low.

Basic setup is quick and easy, and neither an expensive programming box nor a computer is required. This means that many parameters can be changed simply and easily, even on the flying field. More advanced options are available with the optional USB2SYS interface and StudioX software package (PC and MAC). The Microbeast Plus can always be brought up to date by the update functionality and the advanced pilot can thus adapt the device specifically to his needs.

The device can be upgraded to the ProEdition with AttitudeControl (rescue function) at any time via the StudioX software (subject to a fee).

Features: A remote control transmitter with at least 6 channels is required (5 control functions + motor throttle).

Control outputs: 3 swashplate servos Maximum adjustable control frequency: 200Hz Swashplate mix: mechanical, 90°, 120°, 135°, 140°; as well as arbitrary configurable via StudioX, e.g. for virtual TS rotation 1 tail servo All common tail servos with neutral pulses of 1520µs, 960µs or 760µs Maximum adjustable control frequency: 560Hz For operation with SingleLine receiver additionally: Throttle servo/motor controller, additional channel for landing gear, lighting, etc.

Signal inputs: Standard receiver with single channels SingleLine receiver: Spektrum DSM2/DSMX single satellite*, JR RJ01 DMSS single satellite*, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM Sensorboard (e.g. for acquisition of the speed signal of electric or combustion engines).

*only with optional Spektrum satellite receiver adapter.

Technical data: Operating voltage: 3.5V - 8.5V DC (operation on 2-cell LiPo possible) Processor: 32-bit ARM Sensor: 6 axis MEMS (Gyro + Accelerometer) Length: 36mm Width: 25mm Height: 14mm Weight (without cable): approx. 11g

Scope of delivery: Microbeast Plus Receiver connector cable set 3M adhesive pads Adjustment tool Quick start guide in poster format Plastic overview card Decal sheet

Optional accessories: USB2SYS Interface Spectrum Satellite Receiver Adapter

Current firmware In addition to the basic function as flybarless system and tail gyro, an internal speed control function for combustion and electric models is included.

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.