Race Control 10 Brushed Regulator 10A 3.4-8.4 V
19.90 €
Not available at this time Notify me when available
Race Control 10 Brushed Regulator 10A 3.4-8.4 V
Race-Control is a regulator for brushed motors. The regulator can be used in our boats up to 10A. Due to its compact size it is also suitable for small models with little space in the hull. The controller is programmed for forward-stop-reverse. An XT-60 connector is soldered to the battery connector. The motor is soldered directly to the connecting cables. It operates in the optimum voltage range of 1-2S LiPo batteries or 6 V lead acid batteries. The BEC supplies a maximum of 6 V, but also works with lower operating voltages of the drive battery. In this case the output of the BEC is approx. 0.3-0.4 V below the operating voltage (e.g. drive battery 4.8 V = BEC approx.4.5V).
Technical data: Order no.: 7003/80 Operating voltage: 3,4 - 8,4 V Max. Current: 10 A BEC max.: 6 V BEC current: 0,5 A Dimensions approx.: 26x23x9 mm Weight with cable + plug approx.: 11 g
Scope of delivery: 1x regulator 10A Manual
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | aero-naut |
Customers who bought this item also bought
Shaft connection 2.3 mm
Coupling unit alone
Grub screw M3 x 3 mm (10) Grub screw
Metal clevis M 2 (2)
SPEED 320 7.2 V
Email me when available again
5 x clevis 2.0mm spring steel
Receiver RX5 light MLINK 2.4 GHz
Grinder brushes GO!!!/Digital 143
NiMH battery 7.2V, 4000mAh, stick pack with Tamiya connector
Email me when available again
3 - channel receiver 'R3WP' 2.4 GHz waterproof
Pattex Stabilit Express 2-K adhesive 80g
Email me when available again
BUS 24 Fishing boat 1:50 kit
Mechanic standing M1:20 figure
UHU plus endfest 2-K adhesive 33g
Bell with clapper chain 27 mm
Microspeed 1 6V speed controller
X-Cube LiPo battery 850mAh 2S1P 7.4V 30C/60C with XT30 connector
Please send me an email as soon as the item is available