C100 Duo charger with balancer 2x 500W

C100 Duo charger with balancer 2x 500W

Small 2-channel charger KAVAN C100 Duo 2x500W is designed to offer an intelligent charger with high power, mains supply as well as supply from a car battery and very simple and clear operation. With C100 Duo you can charge and discharge common cell types (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-Ion, LiFe, Pb). It is also equipped with built-in 6-channel balancers that ensure safe charging of lithium batteries. The charger is equipped with a color LCD display and programming buttons that allow you to conveniently and very clearly set the parameters and control and monitor charging and discharging. The menu languages also include German and English

In addition to the compact palm-sized design and intuitive operation, the following should be mentioned:

• Program for new types of "high voltage" lithium LiHV batteries with a final voltage for charging up to 4.35V and ULiHV with a final voltage 4.45 V
• Powerful balancer with a current up to 1.5 A
• Possibility of synchronous operation of both channels for charging two identical batteries or parallel charging of one battery with a power up to 800 W
• Adjustable charging and discharging end voltage for lithium batteries (enables gentler charging, which pilots like, or conversely strong overcharging, which car enthusiasts enjoy)
• Adjustable end-of-charge voltage for lead-acid batteries (1.90-2.45 V, enables charging of all types of lead-acid batteries)

Overview of basic functions and parameters:

• Mains supply 100-240 V/50-60 Hz
• DC power supply 10-30 V (XT60 socket)
• For charging and discharging 1 - 16 NiCd/NiMH cells, 1 - 6 Li-Ion/Li-Poly/Li-Fe/LiHV/ULiHV cells or 2- 24 V lead acid batteries
• Adjustable charging current (0.2 A - 20.0 A) in each channel (max. 100 W when supplied from mains, max. 500 W when supplied from a car battery or from a powerful switching power supply)
• Adjustable discharge current 0.2 A - 1.5 A in each channel
• Max. Charging power 1x 800W in parallel charging mode
• Max. Discharge power 2x 15W, max. 1x 30W in the mode of parallel charging
• Charge termination by delta-peak automatic for NiCd and NiMH batteries
• Lithium and lead batteries are charged using the "constant current/constant voltage" method.
• Adjustable delta peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end-of-charge and end-of-discharge voltage for lithium and lead-acid batteries
• Three modes for lithium batteries - charge, discharge and storage mode, all with balancer or without it. Plus discharge mode for safe disposal of a battery before it is handed over for recycling.
• Channel CH1 can work as a stabilized power supply with adjustable voltage 2-30 and current 1.0-5.0 A.
• Easy firmware update with USB-C port.
• Color backlit LCD display with a simple and clear menu and display of parameters while charging/discharging
• Programming buttons for easy and clear setting and control of the charger
• A number of warning messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output, etc.
• Fan for forced cooling
• Compact plastic housing, small dimensions

In both channels the charger is equipped with XT60 ouput sockets and universal sockets for JST-XH balance plugs, which allow direct connection of battery power cables and JST-XH balance plugs of 2-6S sets. If you use XT60 and JST-XH connector sets, you do not need charging cables and adapters. You can use standard Sky RC adapters or RC system to connect balance plugs of other systems.

Charger set includes: KAVAN C100 Duo charger, instructions. CHECK CONVERSION from Czech: The charger is shipped from the factory with a menu in Czech. Some may find it difficult to change this (e.g. to German or English).but it is quite simple:

1. after switching on, press and hold BOTH menu buttons for about 2 seconds => the main menu will pop up. 2. 2. select the second last menu item with the arrow keys ("System. nastaveni") and confirm with a menu button. Scroll down with the arrow keys to page 2, to the menu item "Jazyk" (symbol of a globe) and confirm with the menu knob. Select the language using the arrow keys and confirm with the menu knob.

Technical data: Input voltage (car battery DC): 10 - 30 V Input voltage (AC): 100 - 240 V Charging current: 0.2 - 20 A Power during charging: 100 W Power during charging ( DC car battery ): 500 W Discharge current: 0.2 - 1.5 A Power when discharging: 15 W Number of channels: 2 NiCD: 1 - 16 cells NiMH: 1 - 16 cells Li-Po: 1 - 6 cells Li-Ion: 1 - 6 cells Li-Fe: 1 - 6 cells Li-HV: 1 - 6 cells Pb: 1 - 12 Balancer: Yes Balancer current: 1.5 A Length: 142 mm Width: 135 mm Height: 64 mm Weight: 700 g

Scope of delivery: 1x Charger C100 DUO Instruction manual

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.