F7F Tigercat PNP - 170cm incl. Reflex Gyro
909.00 €
Not available at this time Notify me when available
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 155.35 € | (8.90%) |
12 Monate | = | 79.36 € | (8.90%) |
24 Monate | = | 41.36 € | (8.90%) |
36 Monate | = | 28.72 € | (8.90%) |
48 Monate | = | 22.45 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
The F7F Tigercat from FMS is a very detailed aircraft with 1700mm wingspan, which impresses not only with its prototypical appearance, but also with its enormously prototypical flight pattern.
Like the original The F7F Tiger Cat features numerous scale details that make the model look like an original not only in the air but also on the ground. Fake engines, machine guns, surrounding rivets, pilot figure and the functional LED lighting provide an original look.
Powerful drive With the powerful brushless external rotors in combination with two 60A brushless controllers (with 10A UBEC) and a separately available 6S battery, the drive system offers enormous power for prototypical flight action.
Built-in electronics The model is made of EPO rigid foam and comes with completely built-in electronics ready to fly out of the box. Motors, controllers, servos for ailerons, rudder and elevator as well as the landing flaps are pre-installed. The sturdy metal retractable landing gear is also installed ready to go. All that is needed is a suitable battery and the remote control system.
Robust construction Thanks to the sturdy construction made of EPO hard foam material, the model can forgive many a hard landing. Foam parts can be quickly and permanently repaired with superglue if damaged. No glue is usually needed to assemble the model. Electronics and landing gear are already installed and wings and tail units are screwed together for assembly and disassembly.
FMS Reflex stabilization system included Included with this model is an FMS Reflex system programmed specifically for this aircraft. This electronic stabilization system is designed to assist, but not interfere with, pilot control commands. The Reflex system works with both PPM and SBUS inputs, and works natively with all common rudder control systems. When the Reflex system is connected to a 3-channel switch, 3 different modes can be selected:
- Stabilized mode: when the control sticks are released, the model is automatically brought into a neutral flight position, which offers beginners and inexperienced pilots in particular a lot of safety in dicey situations.
- Optimized mode: The gyro system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable position.
- Off: The Reflex system can be switched off completely.
The FMS Reflex System is set specifically for this flight model. No further programming is required
Features
- PNP model made of robust EPO hard foam material
- 2 powerful brushless outrunner motors, high performance controller and servos with metal gearbox ready installed
- robust electric retractable landing gear made of metal
- 62 mm diameter front wheel, 84 mm diameter rear wheels for take-off and landing on both paved and grass runways.
- Reflex stabilization system with gyro (compatible with all receivers with min. 4 channels) included in delivery
- working LED lighting with high luminosity
- functional landing flaps
- screwed construction and multi-connectors
- large battery compartment for 6S 5000mAh LiPos
- many scale details
- ready painted
- including decal sheet for various design possibilities.
- including 3-blade propeller 13x9"
- about 6 minutes flight time with 4S 7.4V 2600mAh
- including richly illustrated assembly instructions
Technical data
- wingspan: 1700 mm
- length: 1484 mm
- Flight weight: approx. 5450 g
- Wing area: 49,5 dm²
- Wing loading: 110 g/dm²
- Motor: 2x Brushless 4250-KV440
- ESC: 2x 60A with 10A BEC
- Servos: 7x 13g Analog MG and 5x 23g Digital MG
Required accessories
- Remote control: min. 6 channels
- Receiver: min. 6 channels
- Battery: 6S LiPo 5000mAh
- Battery charger
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Ausführung | ARTF/PNP |
Gewicht in g | 5450,00 |
Hersteller | FMS |
Länge in mm | 1484,00 |
Material Rumpf | Schaum |
Material Tragfläche | Schaum |
Spannweite in mm | 1700,00 |
Battery charging cable EC5, 300mm
Lipo battery 5000mAh 22.2V 45C 6S1P with EC5 connector
Email me when available again
D260 AC/DC Duo Charger LiPo 1-6S / 1-15 Z NiMH 14A 260W
Please send me an email as soon as the item is available