AMXFlight F8F Rare Bear 383mm 4 Channel 3D/6G, 2.4GHz RTF

AMXFlight F8F Rare Bear 383mm 4 Channel 3D/6G, 2.4GHz RTF

he Grumman F8F Bearcat is a 1940s piston engine-powered, single-seat U.S. fighter of all-metal construction that was commissioned during World War II, but never made it beyond prototype construction and therefore never saw wartime service. Equipped with four 12.7mm caliber machine guns in the wings, the Bearcat was used by French and Thai forces for a short time after 1945. Still popular as a racing aircraft thanks to its enormous top speed, the well-known Rare Bear - a modification of the F8F-2 - holds the record for piston engine-powered aircraft at 850.24 km/h on a 3-km course at restricted altitude.

The Rare Bear Amewi Edition is a scale replica of the famous Reno Racer with the original racing aircraft livery and combines perfect flight characteristics (6G for beginners, 3D for advanced pilots) with state-of-the-art technology. The model is controlled by all axes (lateral, altitude, side, motor) and is self-stabilizing (gyro) in 6G mode. This stabilization prevents the aircraft from stalling and allows only a limited angle, so loops, rolls or inverted flight are not possible in this setting. However, if switched to 3D mode by means of the high-quality 2.4GHz transmitter, it is also suitable for dynamic aerobatics. All described standard maneuvers are then possible without any problems. If something does go wrong in the air, the P-40 can be switched back to 6G mode at the touch of a button and immediately resumes a stable flight attitude (rescue function). In addition to these features, the model is equipped with a receiver board that allows operation with e.g. Futaba or other 5V S-Bus receivers as well as DSM receivers with a 3V output. Thus, the model is not dependent on the supplied remote control, but can alternatively be used with an existing transmitter.

Features:

• Receiver board with 5V output for S-Bus receivers and 3V output for DSM receivers.
• Noble painting in Reno Racer design
• 6G and 3D mode switchable at the transmitter for beginners and advanced pilots
• Model comes as RTF set incl. model, battery, transmitter and charging cable
• Landing gear included for ground launches
• Large battery for long flight time included (approx. 10min, LiPo 3.7V 400mAh)
• Long range thanks to modern 2.4GHz system (approx. 150m)

Technical data: Wingspan: 383mm Length: 360mm Height: 135mm Weight: 68g Main material: EP foam Thrust: approx. 1:1 Motor: brushed 1020 Servos: 3x Remote control: 4 channels 2,4GHz Range: approx. 150m Battery: LiPo, 1S, 3,7V, 400mAh, 25C, softcase, Molex connector, LxWxH 48x18x8mm, 12g Flight time: approx. 10min Charger: USB plug Charging time: approx. 60-80min

Scope of delivery: Model Transmitter Battery USB charging plug Accessories for mounting Manual DE/EN

Required accessories: 4x AA Mignon batteries for the transmitter

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.