Wingo 2 Kit Kit 'You can fly' Brushless 1100mm PNP With brushless motor, controller and servo
169.99 €
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 29.05 € | (8.90%) |
12 Monate | = | 14.84 € | (8.90%) |
24 Monate | = | 7.73 € | (8.90%) |
36 Monate | = | 5.37 € | (8.90%) |
48 Monate | = | 4.20 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Wingo is one of the best entry-level model airplanes, which was launched back in 1998 and was successfully sold worldwide for many years. The model is now technically modified available again.
The Wingo 2 is made of lightweight EPO foam and is therefore even more stable and durable. All previous wooden parts have been replaced by plastic injection molded parts, which simplifies the assembly and reduces it to a few hours. The wing is screwed to the fuselage dome with a 5 mm plastic screw. The wing struts can be hooked in without tools and give the Wingo 2 additional stability.
The included brushless motor is specially tuned for the Wingo 2 and gives the model good control following even at low airspeed thanks to pressure drive.
Both the motor and the speed controller are already wired and connected with polarity-safe soldered ready for installation. Motor and speed controller have power reserves in order to be able to use the Wingo 2 optionally also for the water start with float. Therefore, 2 different sized propellers are already included with the model.
The small 5 x 4" propeller is ideal for beginners as the Wingo 2 climbs away flat and does not have a large load change from idle to full throttle. This makes it easy to learn model flying.
Once you have practice and enough flying experience, you can install the included larger 6.7 x 3.5" propeller. This propeller increases the power by about 15%. The climb performance is increased and the power is strong enough to launch the Wingo 2 with float (optional available) on the water.
A 3s 1100 mAh Lipo battery is used as power supply, which is also equipped with reverse polarity protected plug connection and is available separately.
The new self-adhesive decal has been designed so that the top and bottom surfaces are very different. This makes it easy for the pilot to see the model's flight attitude. The detailed, illustrated instructions guarantee easy and safe final assembly. final assembly.
The Wingo 2 is the ideal model for beginners with good-natured flight characteristics. and also ideally suited for beginner flight training in model flying clubs.
Developed and produced in Germany. A real made in Germany product from Robbe Modellsport!
Technical data: Wingspan: 1100 mm Weight: ca.530g(flight weight) recommended motor: RO-POWER 2822-23 control: H,S,M, Manufacturer: ROBBE Fuselage: EPO Wings: EPO Design: PNP recommended battery: 3S/1100mAh LiXX Flight / Construction: 11 Drive type: Electric
Scope of delivery
- Foam parts made of high quality EPO molded foam
- Aluminum tail boom
- High quality decal sheet
- Plastic parts kit for quick assembly
- Brushless speed controller Ro-Control 25A BEC ready wired
- Brushless motor Ro-Power 2822-23 ready wired
- propeller 5x4"
- Propeller 6,5x3,5"
- 2pcs S0009 Rovor servos
- Seat shell
- EPS transport device
- small parts
- comprehensive, illustrated assembly instructions in German/English/French
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Ausführung | ARTF/PNP |
Gewicht in g | 530,00 |
Hersteller | robbe |
Material Rumpf | Schaum |
Material Tragfläche | Schaum |
Spannweite in mm | 1100,00 |
XT60 gold contacts 3 pair
XTRON LiPo Battery 1000mAh 3S1P 11.1V 40C/80C
Email me when available again
Customers who bought this item also bought
XTRON LiPo Battery 1250mAh 3S1P 11.1V 30C/60C XT60