robbe 2695 VAYU flying wing model 1300mm wooden kit in innovative plywood construction

The VAYU is a board-only wing with a wide range of uses. The VAYU is supplied as a kit. The laser-cut wooden parts are assembled and glued together in just a few steps using the plug-in box principle. Please read these instructions carefully, even if you have built many RC models before. We have given a lot of thought to detail solutions in order to keep the construction effort as simple and low as possible without neglecting the functionality. The kit is manufactured with modern CNC technology. This gives you the certainty that you will not experience any unpleasant surprises when building the VAYU due to components that do not fit. Now we wish you a lot of fun building your new VAYU and especially flying it afterwards!

The assembly of the VAYU can be done quickly and easily thanks to CNC-lasered and thus precisely fitting components. With the help of these building instructions, the VAYU can be built without any problems, even without a building plan. The building process is quick and can be completed in a few evenings, even for inexperienced model builders. Take some time to study these building instructions thoroughly before you start assembling. The assembly is done on a template made of poplar plywood using the plug-in box principle. The design allows the wing, including the bottom and top planking and end rails, to be assembled in one go. This virtually eliminates wing warpage! The VAYU has transport-friendly dimensions, a Quick Connect wing lock with Easy Power ON/OFF function, an integrated flit hook and a ballasting option (optional ballast box # 26950002).

Recommended RC equipment:

• Transmitter with programmable delta mixer and dual rate.
• Micro receiver with normal range, maximum face size 25 x 9mm
• Sub-micro servos, 9mm thickness, ROBBE FS 166 HV # 9123
• Receiver battery, 2S Lipo 1000mah "SLIM" 20x12x105mm # 9788328

Required tools:

• Construction board, e.g. carpenter's board 30 x 80 cm, taped with parcel tape.
• Sharp cutter knife
• Sandpaper grit 100 and 240
• Sanding board, e.g. aluminum angle profile 50 x 30 mm
• Superglue "Speed" (low viscosity and medium viscosity) # 5062 / 5063
• Activator spray # 5017
• Glue stand # 50610
• White glue
• Epoxy glue, e.g. UHU Endfest Plus
• Clamps, weights for weighting
• masking tape
• Soldering iron, solder
• Hot air gun (or similar for the heat shrink tubing)
• Key files (flat, square 3mm)
• pliers
• Right angle
• Torx 6, Torx 10
• Rudder deflection gauge # 50611

Materials needed:

• Foil for stringing, approx. 140 cm
• Nickel-plated lead granules, ball diameter 1 mm to 3 mm, approx. 100 g*.
• Rolled lead, approx. 100 g *

(* not required when using the accessories listed below)

Accessories: 26950002 Ballast box for VAYU including ballast weights 26950001 Trim weight cast for VAYU (for fuselage nose)

Technical data wingspan (mm): 1300 Flight weight approx. (g): 700 Airfoil: 7,5 Controls: H,Q Manufacturer: Robbe Modellsport Fuselage: wood Wings: Wood/rib construction Version: KIT - CONSTRUCTION KIT recommended battery: 2S/1000mAh LiXX flying experience: advanced building experience: advanced drive type: without

The product VAYU flying wing model wooden kit in from Robbe Modellsport in the Gliders category has a wingspan of 1300 and a weight of . The model is controlled by the functions H,Q*. The model is made of wood.

• Explanation control functions:

H ... Elevator S ... Rudder Q ... Aileron M ... Motor control V ... Vector control SK ... Interference flaps WK ... Flaps EZFW ... Retractable landing gear SKU ... Tow release ( ) ... optional - control functions written in brackets are optionally available for the described model

Scope of delivery

• Kit, all CNC wood parts required for construction made of precisely laser-cut balsa, poplar, or plywood
• Template made of poplar plywood
• Quick Connect surface lock with Easy Power ON/OFF function
• Integrated flitch hook
• small material for rudder linkages
• GRP rudder horns
• CFK wing plug-in
• comprehensive illustrated instructions in German, English, French

This product is manufactured by: Modellbau Lindinger GmbH Industriestraße 10 4565 Inzersdorf im Kremstal Österreich [email protected]

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.