Kavan KAV02.8085RTF Beta 1400 powered glider RTF - red

Virtually finished model of a school motor glider with a wingspan of 1400 mm made of the almost indestructible extruded polyolefin foam (EPO) with a brushless motor, 20A controller and 4 servos. Controlled are rudder, elevator, aileron and motor speed. Complete 2.4GHz RC set with an 8-channel T8FB transmitter, receiver, 3S LiPo battery and charger.

The BETA 1400 model under the KAVAN brand externally retains the features of the original BETA 1400 model, but it is a completely new model with slightly different dimensions, a new wing profile, brushless motor with a folding propeller and a much more sophisticated design. New molds and advances in foam technology ensure that all parts are much finer and more precise. The BETA 1400 model - a reliable and powerful training and practice powered glider - is ideal for novice pilots, whom it takes from learning to fly to acrobatic figures and thermal soaring. In the same way, it delights hobby pilots for whom it offers a space-saving and easily transportable model for great, relaxed model flying.

BETA 1400 is built from highly resistant extruded polyolefin foam EPO and is powered by a brushless motor. Thanks to the motor placed on the pylon behind the wing, the model resists very well to rough treatment and tolerates stick landings, which would cause damage to the propeller in the classic models with the motor in the nose of the fuselage.

The brushless motor (with outrunner, C2814-1400) is mounted on the fuselage, on the pylon behind the wing with a folding propeller. The fuselage made of EPO foam with CFRP longitudinal reinforcements contains the KAVAN R-20B regulator, GO-09 rudder and elevator servos. The canopy is removable with magnetic fasteners. The two-piece wing is also made of EPO foam. The ailerons are controlled by 2 servos hinged in the wing by short direct wire linkages. The wing halves are joined with a CFRP tube connector and secured with a screw on the underside of the wing. The tail surfaces in the classic arrangement are also made of EPO foam and are controlled by Bowden cables. The engine is cooled by the airstream flowing through the pylon and engine openings.

Completion involves only gluing tail surfaces (with a medium liquid superglue), attaching wing halves, connecting the receiver and drive battery. Ailerons, rudder, elevator and motor speed are controlled.

The model is controlled by the 8-channel KAVAN/RadioLink T8FB BT 2.4GHz FHSS transmitter (system with frequency hopping) with cross sticks in mode 1 (throttle right), trims and reverse switches for all channels. You can use the transmitter right out of the box as a classic "non-computer" transmitter with trims and mechanical reverse switches for aileron, elevator, throttle and rudder channels. After connecting to PC or smartphone application with Android or iOS operating system, you can then program servo reversing, use dual rate deflections, expo of deflections and other smart functions. For transmitter power supply, you need 4 AA alkaline battery mignon cells or rechargeable batteries (not included in RC set).

BETA 1400 is available with the LiPo battery 11.1 V 1600 mAh. The 7x6" folding propeller fits with it. The model can handle 3-cell packs up to approx. 2200 mAh without any problems.

BETA 1400 is suitable for novice pilots - we always recommend - to make the first takeoffs under the supervision of an experienced pilot to enjoy a relaxing time model flying. The flight characteristics are pleasant. The model introduces you to control around all three axes as well as proper coordinated control with rudder, elevator and ailerons. This experience is useful when you begin flying your first aerobatic model or semi/scale model. By changing the aspect ratios of the servo and rudder levers, you can adjust the control surface travels. The novice pilot starts with small deflections. The experienced pilot sets large deflections that also allow a bit of aerobatics - loops, barrel rolls and turns BETA manages quite well! The power of the motor is sufficient for a very steep climb. At the same time, the model is not overpowered, which could cause difficulties for the novice pilots. BETA 1400 can take advantage of even weak thermals and linger in the sky for quite a long time.

Tip: T8FB transmitter is supplied with controllers in mode 2. If you prefer mode 1, you can modify the transmitter.

Technical data: Span [mm] 1400 Length [mm] 966 Weight [g] 700 - 770 Wing area [dm2] 24.5 Controllable functions S,H,Q,M

Scope of delivery: Fuselage made of EPO with a mounted brushless motor Folding propeller 7x6" speed controller KAVAN R-20B 2 servos Wings made of EPO with mounted QR servos Tails made of EPO CFK tube connectors for the wing 8-channel transmitter RadioLink T8FB BT 2.4GHz FHSS 8-channel receiver R8EF 2.4GHz FHSS Drive battery LiPo 11,1 V 1600 mAh Fast charger Detailed building and flying instructions

This product is manufactured by: KAVAN Europe s.r.o. Doubravice 110 533 53 Pardubice Tschechien [email protected]

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.