ARCUS II electric glider 1840mm PNP

Article number: AV2649
Manufacturer: robbe
Manufacturer Product-No.: 2649
available stock: 1
Article is in stock - available stock: 1 Article is in stock

179.99 Article is in stock - available stock: 1

incl. 19% VAT excl. shipping to Germany / Deutschland
Free delivery within Germany from 100, - order value
Shipping cost foreign countries

Amount

VISA
MasterCARD
amazonpay
Vorauskasse
Nachnahme
DHL
PayPal
Targobank
Rechnung
SEPA Lastschrift

Produkte einfach finanzieren

Finanzierung Rate eff. Zins
6 Monate = 30.76 € (8.90%)
12 Monate = 15.71 € (8.90%)
24 Monate = 8.19 € (8.90%)
36 Monate = 5.69 € (8.90%)
48 Monate = 4.45 € (8.90%)
Targo-Bank

Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.


ARCUS II electric glider 1840mm PNP

No matter if you are an ambitious beginner or an advanced model airplane pilot, the Arcus II is the right choice if you are looking for a powerful and compact glider with electric drive. Whether fast or slow, agile or quiet, powered or gliding flight, with this model you always have the right all-rounder in use. The model is controlled via three axes. Due to its powerful drive set, the Arcus II has enough power for the climb, and then, with good thermals, to sail.

Despite its wingspan of 1,840 mm, it is easily transportable thanks to its separable wing. The model comes with four servos mounted for aileron, rudder and elevator, as well as with the drive set mounted. CFRP reinforcements in the fuselage and wings, as well as the landing gear and two plastic protectors for the fuselage complete the scope of delivery.

The model can be retrofitted with flaps in no time. The large ailerons already have an embossed parting line for this retrofit, as well as the mounting points for the additional control horns. The wings have integrated mounting slots with cable ducts for the additional servos. Thus, only the available retrofit kit as well as two additional 8 - 9 g servos, a suitable glue and of course a free channel at the radio control system/receiver are required. Of course, the installation is described in the illustrated assembly instructions.

Technical data: Wingspan: 1840 mm Flight weight: approx. 850 g Control: H, S, Q, M, (WK) recommended motor: BL 28x30 1.100KV Fuselage: EPO Wings: EPO Version: PNP - PLUG N PLAY recommended battery: 3S/1300mAh LiXX flying experience: beginner building experience: beginner Drive type: Electric

Scope of delivery:

  • Almost completely assembled flight model in foamed construction
  • Fuselage, wing and tailplane in foamed construction
  • 4 pre-assembled 8g servos for control surfaces
  • Pre-assembled brushless controller 20A 2-3s
  • Pre-assembled brushless motor 28x30mm 1100KV
  • CFRP plug-in tube for wings
  • Small parts for assembly
  • Assembly instructions in German/English/French language


Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.

Ausführung ARTF/PNP
Gewicht in g 850,00
Hersteller robbe
Material Rumpf Schaum
Material Tragfläche Schaum
Spannweite in mm 1840,00


 

Manufacturer

Lade ...