Ultra Stick 10cc ARF 60'' aerobatic trainer

The Hangar 9® Ultra Stick™ 10cc ARF is the perfect symbiosis of sport, high-speed, aerobatic and 3D in one aircraft. As a modern version of the proven design, it is the sophisticated platform for a wide range of propulsion options from gasoline engines to electric motors.

Features

• A distinctive Ultra Stick design with outstanding flight performance
• Perfectly constructed of lightweight laser-cut balsa and plywood
• Large double beveled rudders and steerable tail wheel
• Double beveled flaps provide large deployment and mixing range
• Painted aluminum landing gear with color-matched GRP wheel shoes
• Large battery door for easy battery replacement
• Tool-free assembly with one-piece wing and thumbscrews
• Prepared for float insert (floats sold separately)
• Brilliant Hangar 9® UltraCote® covering
• Designed for Evolution® 10cc (EVOE10GX2) gasoline engine
• Electric motor mount included for easy installation
• All hardware included including spinner

Specifications: Control Throw (Flaps): Take Off 30mm Landing 45-60mm Control Throw - High (Ailerons): 40mm Up and 35mm Down Control Throw - High (Elevator): 45mm Up and down Control Throw - High (Rudder): 90mm left and right Control Throw - Low (Ailerons): 15mm up and down Control Throw - Low (Elevator): 20mm up and down Control Throw - Low (Rudder): 45mm left and right Retractable landing gear: No Recommended battery: 14.8V 4000mAh 30C 4S LiPo (sold separately) Recommended Receiver Battery: 2000mAh 2S 7.4V LiPo Receiver Battery (sold separately) Recommended regulator: 60 Amp Expo (Ailerons): 25 High 15 Low Expo (Elevator): 25 High 15 low Expo (Rudder): 25 High 15 low Landing gear: Yes Wing area: 810 sq inches Flight weight: 7lbs (3175g) Estimated flight time: 6-8 mins Flaps: Yes Length: 57" (1448mm) Material: Balsa Motor size: Power 52 (sold separately) Motor size: 10cc (sold separately) Profile: Symmetrical Propeller: 12x6-14x8.5 Center of Gravity: 3-1/2"- 4-1/4" inches (89mm-108mm) back from the leading edge of wing Servos: Standard servo (sold separately) Span: 60" (1524mm) Spinner size: 2.25" ( 57mm) Wing loading: 19.9oz/sq ft Prefabrication level: ARF (Almost Ready-To-Fly)

Scope of delivery: ARF model without propulsion and electronics

Required accessories

• 10cc two- or four-stroke nitro or gasoline engine or comparable e-drive
• 6+ channel radio control and receiver
• (7) standard servos (6 for E-version )
• Batteries for receiver or drive (depending on drive version)
• propeller

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.