Duo Switch 2 channel switching module

The switch module is plugged directly into a receiver output. This means that any free channel on the transmitter can be used to switch loads in the model. All variants are wired ready for installation - just connect a power source up to a maximum of 30 V and the consumers to be switched. The series starts with the Uno Switch and one switching function, over the Duo Switch with two outputs up to the Quadro Switch with 4 separately switchable loads on one channel. The versions Duo and Quadro Switch equipped with a memory function. This means that when the prop channel or switch on the transmitter is pressed once, the consumer is switched on and supplied with power until a further actuation of the stick / switch switches the function off again.

The new series of electronic switch modules is completely manufactured in Germany.

This switch module is especially for switching on and off two special functions such as noise module, small electric motors or lighting. Any free proportional channel or 3-step switch can be used as encoder at the transmitter.

Technical data Switching functions 2 Switching current max. 2x 1,5A Switching voltage max. 30V operating voltage 4,8 - 9V Dimensions approx. 19x40 mm Weight 6g

Scope of delivery:

1 piece

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.