Ezrun MAX4-HV Regulator Sensorless 300 Amp, 6-12s LiPo, BEC 10A
389.00 €
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 66.48 € | (8.90%) |
12 Monate | = | 33.96 € | (8.90%) |
24 Monate | = | 17.70 € | (8.90%) |
36 Monate | = | 12.29 € | (8.90%) |
48 Monate | = | 9.61 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Ezrun MAX4-HV Regulator Sensorless 300 Amp, 6-12s LiPo, BEC 10A
The Ezrun Max4 regulator is suitable for the extra large 1:4 and 1:5 scale models. This regulator can be ideally used in any of the mentioned models no matter if heavy duty off-roaders or trucks. It is the ideal choice for high-end models that are heavily demanded or aggressively operated.
Despite its enormous size, care was taken to use high-quality and, above all, durable materials in its construction. This can be seen, for example, in the fact that the Max4 controller is excellently protected against dust, water and similar external influences. The electronic switch is also optimally protected from damage that could otherwise quite possibly occur during a normal ride. In addition, the Ezrun Max4 has a built-in super high-current BEC that can provide a max output power of up to 25A. So the output voltage can be switched between 6V, 7.4V and 8.4V. The high-current BEC is designed to provide sufficient power to the current high-current servos on demand to precisely control the appropriate large models.
Features:
- Super-strong switch mode BEC with a consistent current of 10A, instantaneous 25A and the ability to switch between 6, 7.4 and 8.4V
- Fireproof circuits to protect the battery plug
- Other built-in protections: undervoltage, overheating, signal loss, ...
- Versatile programmable
- Real-time data recording
Technical data: Cont. / peak current: 300A / 2000A Motor type: sensor/sensorless brushless motors Motor limit: 12S LiPo: kV <= 600 (70125 size) LiPo cells: 6-12S BEC: 6V / 7.4V / 8.4V with 10A (switchable) Fan: Yes (powered by built-in BEC) Programming input: Fan / PRG input Programming: LED programming card, LCD programming box, OTA programming module Length: 125 mm Width: 85 mm Height: 61.7 mm Weight: 775.4g Application: 1/4 and 1/5 Heavy Duty Off-Road, Trucks
Scope of delivery: 1x MAX4-HV controller Manual
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Hobbywing |