Absima 2100018V2 Electric motor 55T & 80A ESC 'Thrust B-Spec V2' 1:10 ESC

Absima proudly presents its new programmable "ALL-IN-ONE" BRUSHED DRIVE CONTROLLER which can be used for 1:10 RC crawlers and race cars. The basic setting for the vehicle and battery type is made via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings. HIGHLIGHTS:

• One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)
• Programmable via jumper and separately available programming card (Art. 2110061)
• 2S LiPo operation recommended
• Motor ready soldered - plug-n-play

Programmable features (via programming card):

• Initial Start Force (starting force): 5%* / 13% / 21% / 29%
• Low V cut-off (undervoltage protection): 3.1V* / 3.4V / Off
• Crawler Setup - Initial Drag Brake (motor brake): 100%* / 90% / 80% / 70%
• Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%
• Max Reverse Force: 50%* / 75% / 100%
• Start Mode (Punch): Medium* / Strong / Soft

Standard Features ESC:

• Waterproof and dustproof - suitable for all weather conditions (clean and dry the ESC after each use to avoid corrosion).
• Specially designed for BRUSHED RC cars and crawlers for excellent acceleration and sensitive driving feel.
• Low internal resistance and excellent heat dissipation.
• Multiple protection functions such as low voltage cut-off for LiPo and NiMH batteries, ESC overheating protection and signal loss protection.
• Easy to program with jumper and pocket-sized programming card (available separately - Art. 2110061)

ESC specification:

• Continuous/short-time load: 80A/320A
• Resistance: 0.0014ohm
• Suitable motor types: Brushed standard motors
• Battery recommendation: 2S LiPo / 6 cells NiMH
• BEC 6.0V/5A
• Motor limit 2S LiPo/5-6 cells NiMH: = 11T or <25,000rpm
• Dimensions: 41.5*35*29.5mm
• Connector system: T-plug
• Weight: 63.4g

Specification B-Spec motor:

• Turns: 55T
• Idle speed: 7,700 rpm
• Output power: 85W
• Operating voltage: 7.2-7.4V
• Frame size: 540
• Motor shaft: Length 12.3mm; Ø 3.18mm
• Motor size: Length 53.2mm; Ø 35.7mm
• Ball bearing: 2
• Weight: 165g

Scope of delivery:

• 1:10 Brushed speed controller V2
• Thrust B-Spec brushed motor
• Adhesive strips
• Instruction manual

This product is manufactured by: Absima GmbH Gibitzenhofstr. 127A 90443 Nürnberg Deutschland [email protected]

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.