B13DLM V2 Mini Servo Metal Gearhead 0.10sec/4.5kg at 8.4V

Article number: RDB13DLMV2
Manufacturer: AGF-RC
Manufacturer Product-No.: B13DLMV2
available stock: 4
Article is in stock - available stock: 4 Article is in stock

23.90 Article is in stock - available stock: 4

incl. 19% VAT excl. shipping to Germany / Deutschland
Free delivery within Germany from 100, - order value
Shipping cost foreign countries

Amount

VISA
MasterCARD
amazonpay
Vorauskasse
Nachnahme
DHL
PayPal
Targobank
Rechnung
SEPA Lastschrift

B13DLM V2 Mini Servo Metal Gearhead 0.10sec/4.5kg at 8.4V

The AGF-RC B13DLM V2 is a 12mm mini servo which is HV capable and programmable! Thus it looks for its equal in this class. Operation on a 2s LiPo is no problem for this little powerhouse. With 4,5kg*cm torque it can be used in different tasks. Suitable for wing models and as an upgrade of corresponding RTF servos.

The B13DM V2 is small, light and inexpensive, but still offers very good performance.

The B13DLM V2 is also programmable with the optional USB Inteface AGF-SP.

This requires a Windows computer running Windows 7 or 10. The servos are powered directly through the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, if needed, the Sanwa SSR mode can be activated which is especially interesting for RC car drivers. Also, the integrated overload cutoff can be adjusted in 3 steps and selected what should happen in case of signal loss.

Of course, these are optional features, all servos can be operated directly out of the box normally and do not need to be adjusted beforehand!

Features:

  • Inexpensive small mini servo with metal gearbox
  • HV capable, 4,8V - 8,4V
  • 4,5kg*cm at 8,4V 0,10sec / 60°.
  • Programmable with optional USB Interface AGF-SP
  • Digital servo double ball bearing

Technical data: Operating time S1/60° (sec): 0.13 Actuating time S2/60° (sec): 010 width (mm): 12 Weight (g): 17 Length (mm): 22,8 Height (mm): 29,4 Actuating force S1 (kg*cm): 3,8 Actuating force S2 (kg*cm): 4,5 Voltage range: 4,8V-8,4V Control frequency: Up to 333Hz, center pulse 1520 us High voltage capability up to 8.4V: Yes Motor type: Brush motor Application recommendation: Helicopter, airplane, car, boat Ball bearing (Quantity): 2 Voltage 1 (Volt): 6,0 Gear type: Metal Housing type: Part metal Output teeth (number): 25 Voltage 2 (volts): 8,4 Classification: Mini

Scope of delivery: 1x Mini Digital Servo


Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.

Breite in mm 12,00
Getriebe Metall
Gewicht in g 17,00
Hersteller AGF-RC
Höhe in mm 29,40
Länge in mm 22,80
Servoart Digital
Stellkraft bei 6V in kg 3,80
Stellzeit bei 6V sec 0,13


 

Manufacturer

Lade ...