AGF-RC A35BHLP A35BHLP Premium Brushless Midi Servo 0.07sec / 22kg

AGF-RC A35BHLP Servo

• High-end premium brushless midi servo extremely powerful and fast
• HV capable, 4.8V - 8.4V, Up to 180° servo travel
• 22kg at 8.4V 0.070sec / 60°, New PRO brushless motor
• Programmable with optional USB interface AGF-SPV3, 25 tooth output Savöx, Futaba compatible
• All-aluminium housing, only 45 grams in weight, new optimized software for extreme engagement behaviour

The AGF-RC A35BHLP is a high-end premium midi brushless servo with an all-aluminum housing. The servo is HV capable and can be operated directly from a 2s LiPo (4.8 - 8.4V). The new PRO brushless motor provides unprecedented performance in this class.

Completely newly developed software and internal control ensure extreme holding power even around the zero position. The virtually backlash-free gearbox rounds off the overall picture, a servo for the highest demands.

With an actuating force of 22 kg and a weight of 45 grams, this power proftz can show what it can do in various tasks. At just 0.070sec/60°, the A35BHLP is very fast, making it the ideal servo for the ambitious racer or pilot. The maximum servo travel is up to 180° These performance data are ideal when little installation space is available but maximum performance is required.

Whether in fixed-wing models, rc cars or on the swashplate in 500-600cc helicopters - the A35BHLP delivers top performance that is second to none.

15.8kg at 6.0V 0.090sec / 60° 19.5kg at 7.4V 0.080sec / 60° 22kg at 8.4V 0.070sec / 60°

The 25 tooth output is compatible with all common servo levers on the market

The A35BHLP is also programmable with the optional AGF-SPV3 USB interface.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

Features:

• Actuating time S2/60° (sec): 0.070
• Actuating time S1/60° (sec): 0.080
• Width (mm): 15
• Actuating force S1 (kg*cm): 19.5
• Actuating force S2 (kg*cm): 22
• Height (mm): 29.2
• Length (mm): 35.5
• Voltage range: 4.8V-8.4V
• Weight (g): 45
• Control frequency: Control frequency up to 333Hz, center pulse 1520us
• High-voltage capable up to 8.4V: Yes
• Recommended applications: Helicopter, airplane, car, boat
• Output teeth (number): 25
• Ball bearing (number): 3
• Voltage 1 (Volt): 7,4
• Motor type: Brushless motor
• Gearbox type: Steel
• Housing type: Full metal
• Voltage 2 (Volt): 8,4
• Classification: Midi

Scope of delivery: 1x A35BHLP Premium Brushless Midi Servo

This product is manufactured by: Huizhou AGF-RC Electronic Technology CO., Ltd. No. 1 Workshop, No. 2 East Lane, Nanhua Road, Chenjiang  Street Zhongkai High-Tech Zone, Huizhou City, Guangdong Province China 516027 [email protected]

Responsible in the EU is: rc-dome.de SieBra GmbH & Co. KG Christian-Liebrecht-Straße 6 58739 Wickede Deutschland [email protected]

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.