AMEWI 28387 ATXB6 6-channel remote control incl. 6-channel receiver

The 6-channel remote gun control offers extensive programming functions for all channels. Thanks to integrated mixing functions, channel 1+2 or channel 5+6 can also be combined and used as one channel. The remote control system also has a telemetry function that shows the battery voltage of the model or the power supply of the receiver in real time on the display.

A dual rate function for throttle and steering extends the customization options. The servo direction for steering and throttle can be reversed, and an additional lever is attached to the steering wheel for convenient one-handed operation. The system can be updated or used for simulators via the USB-C port.

The control system offers the following controls: throttle, steering, a push button on the handle (SWB), a three-way switch above the handle (SWA) and two simple buttons on the top. Digital trim ensures that all settings are retained even when the remote control is switched off.

A special highlight is the hybrid mode, which allows two control channels (1+2 or 5+6) to be assigned to one receiver channel. In addition, the servo travels for channels 3, 4, 5 and 6 can be set separately. An integrated protection function automatically switches off the remote control if no input is made for 15 minutes. The transmitter emits a beep one minute before it switches off.

This system combines innovative functions with a high level of user-friendliness and is ideal for demanding applications.

Highlights:

• Fully programmable remote control with six controllable channels, ideal for functional models, boats, on-road/off-road models, tanks or crawlers (not suitable for model aircraft)
• Telemetry-capable receiver incl. battery cable for data transmission to the remote control display
• Operating voltage 4V-9V, therefore also lipo-compatible (max. 2S LiPo) thanks to XH connection in the remote control (normal balancer plug). 18650 LiIon cells (2x) can also be installed in the battery compartment through a separate flap

Further features:

• High-quality potentiometers installed for durability and sensitive control
• Failsafe programmable
• Protective function in the transmitter for batteries and rechargeable batteries, if no input is made for 15 minutes, the remote control switches off automatically
• Steering wheel equipped with additional control lever for convenient one-handed operation
• Dual rate for steering and throttle via rotary potentiometers (steering angle and speed can be adjusted to requirements)
• Full range (min. 200m) thanks to interference-free 2.4GHz band
• Remote control fits very well in the hand and weighs only 230g
• Hybrid function for channels 1+2 and 5+6, both channels can also be controlled simultaneously via one channel
• Servo travel can be set separately for all channels
• Servo reversal for channel 1+2 (usually steering and throttle)

Technical data Channels: 6 Frequency: 2.4GHz FHSS Betriebsfrequenz: 2400-2438,5MHz Maximum peak power: 14dBm Maximum range: 300 meters Response speed: PWM<20ms Length: 135mm Width: 75mm Height: 205mm Empty weight: 230g Operating voltage: 4-9V (4x 1.5V AA batteries, 2x Li-Ion 18650 or 2S LiPo battery) Display dimensions: 30x15mm Battery compartment dimensions: 60x55x15mm Betriebsfrequenz: 2400-2438,5MHz Maximum peak power: 14dBm

Technical data receiver: Length: 35mm Width: 22mm Height: 12mm Weight: 8g Channels: 6 Frequency: 2.4GHz FHSS Input voltage: 4-9V

Scope of delivery

• Remote control
• receiver
• Hexagon socket wrench
• Instructions DE/EN

Required accessories:

• 4x 1.5V AA Mignon battery
• 2x 18650 Li-Ion cells or 2S 7.4V LiPo battery with XH balancer
• Suitable LiPo charger