GR-12SH+ HoTT - 2.4 GHz receiver
49.90 €
The Graupner GR-12SH+ HoTT receiver can be assigned up to 6 channels and is ideal for use in models with little space or where every gram counts.
With GRAUPNER HoTT 2.4GHz technology, the receiver features a safe hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature" and "signal strength" to the transmitter without any additional sensors.
Features
- Extremely small and lightweight
- SH connector
6 channels or up to 8 channels with digital HoTT sum signal SUMD
- The first 3 channels are output with an interval of 0.1 ms, channels 4 - 6 after half the period time are also output again with an interval of 0.1 ms, so that the control is as precise as possible and the current peaks of the servos still do not occur exactly at the same time.
- Period time 10 or 20 ms programmable
- 5 free mixers
- Internal voltage measurement or external voltage measurement up to 25.2 V with simple voltage divider on channel 5.
- Motor connection for channel 1 for brush motors with max. continuous current consumption of 2 A.
- The use of up to 75 channels ensures extreme operational reliability and is insensitive to external disturbances
- The wide receiver voltage range of 3.6 V - 8.4 V (functional down to 2.5 V) ensures full functionality even with voltage fluctuations
Technical data Channels: 6 Dimensions approx.: 20 x 12 x 7 mm Weight approx.: 1,5 g Frequency: 2400 ... 2483.5 MHz Modulation: 2.4 GHz FHSS Range: approx. 300 m Power consumption: 20 mA Operating voltage: (2.5V) 3.6V to 8.4V Antenna length: 1x wire 30mm Temperature range: -15 to +70°C
Scope of delivery: 1 receiver
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Graupner |
Customers who bought this item also bought
Damper set 4x Alu M-Chassis - M-05
Email me when available again
RS-540 Torque-Tuned Electric Motor Loose, Shaft 3.17 25 Turns
CS-5 servo 5kg/JR standard servo