GR-12L HoTT 2.4 GHz 6-channel receiver
53.90 €
Graupner GR-12L HoTT receiver (6-channel) S1012 The Graupner GR-12L HoTT receiver has a range of approx. 2000m and can be assigned up to 6 channels. In contrast to the standard GR-12 receiver, the GR-12L has no programming options for servo curves, travel limits, servo reverse,... Programming is done via the optional SMART box.
With GRAUPNER HoTT 2.4GHz technology, the receiver features a safe hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature" and "signal strength" to the transmitter without additional sensors.
Features
- The use of up to 75 channels provides extreme operational reliability and is insensitive to external interference
- The wide receiver voltage range of 3.6 V - 8.4 V (functional down to 2.5 V) ensures full functionality even with voltage fluctuations
- A red LED signals the operating status
- Compact size and minimum possible weight
- Very high receiver input sensitivity, thus very high range
- Front-mounted servo connectors simplify installation and guarantee firm connections at all times
- Failsafe and hold programmable
- Attention: Multichannel does NOT work with the GR-12L
Functions with optional SMART-Box For programming and displaying telemetry data with Graupner transmitters of the previous generation, a Smart-Box (No. 33700) is required. This enables full functionality for these transmitters, such as 5 programmable mixers and SUMD signal. The SUMD signal is suitable for many copter flight controls.
- 5 programmable mixers
- Telemetry connection possible instead of a servo on channel 5
- SUMD signal programmable on channel 6 (e.g. for V-Stabi, Microbeast)
- The SMART-BOX is optionally available and not included in the scope of delivery of the receiver
Technical data Channels: 6 Dimensions approx.: 36 x 21 x 10 mm Weight approx.: 7 g Frequency: 2400 ... 2483.5 MHz Modulation: 2.4 GHz FHSS Range: approx. 2000 m Power consumption: 70 mA Operating voltage: (2.5V) 3.6V to 8.4V Antenna length: 1x wire 145 (antenna 30) mm Temperature range: -15 to +70°C
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Graupner |
Customers who bought this item also bought
Cruise control Dragster Brush 70A Lipo NiMh T-Plug Tamiya Plug
Extension - JST XH-XH Balancer 2S - 300mm
Racing screw 2 blade 31mm right turning
mz-12 PRO HoTT 2,4Ghz 12 channel remote control single transmitter
Ezrun regulator 18A SL 18A BEC aA 2-3s for 1/18
Spare shaft stainless steel 2x230 +M2
Receiver battery NiMH 4.8V 950mAh - flat, JR
Aluminum Servo Saver 2mm hole blue for DT-03
Ball bearing set Super Fighter, Neo Fighter DT-02/DT-03
SPLINT SET (BODY)
MULTIPLEX / MPX male and female 3 pairs
D-Power AS-840BB MG Servo, Mini
Sail winch IQ-730 digital, 3T - 4.8-6.0V 102 Ncm
LiPo 7.4V, 1500mAh, AAA Hump Size, Receiver Pack (EH)
Servo holder for horizontal standard servo (2 pieces)
Cruise control Viper Micro Marine waterproof
Servo CS-13 Waterproof MG/ 13 Kg / JR
Lead battery 12V / 7Ah
Battery charging cable compatible with JST BEC 0.75m
Rubber bands 120x5x1.2mm (10)
Email me when available again