R7014SB 14-channel receiver 2.4 GHz FASST/FASSTest with telemetry and S.BUS12

With the Futaba R7014SB, Futaba offers a compact receiver with telemetry and 14 ports. This makes the receiver ideal for larger models in which many servos must be connected.

Analog or digital servos can be connected to ports 1 through 14. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analog servos).

Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo line (3 wires). Although 4 servos are installed in one wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analog servos are to be used on the S.BUS, they must be connected using a PWM adapter.

The R7014SB has antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it at lightning speed.

S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). This allows the measured values to be displayed or acoustically output at the transmitter. In addition, the receiver automatically always transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.

ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

Features

• 18/18 channel FASSTest receiver
• Telemetry with S.BUS2
• Telemetry with 32 channels
• S.BUS / S.BUS2 port
• Hi-Voltage (HV)
• FASST Multi Normal / High Speed Mode
• Antenna Diversity
• Pulse switching digital servos

Technical Data Transmission mode: FASSTest / FASST Frequency range: 2.4 GHz Channels: 18 PWM / 18 S.BUS Transmit power: 100 mW EIRP S.BUS port: S.BUS / S.BUS2 Voltage range: 3.7 - 8.4 V Weight: 21.0 g Dimensions: 50 x 37 x 15 mm

Scope of delivery

• Receiver R7014SB

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.