R7008SB 2.4GHz FASSTest 8/18 channel receiver with telemetry & S.BUS2
99.99 €
139.00 € UVP*
With the Futaba R7008SB, Futaba offers a particularly light and small receiver with telemetry. Its narrow design makes it ideal for use in narrow fuselages.
Analog or digital servos can be connected to ports 1 to 8. To allow shorter response times, the servo output signal can be changed to 6.3 ms for digital servos (instead of 16 ms for analog servos). The PWM ports can be switched so that channels 9 to 18 can be used alternatively at the ports.
Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port (port 8). All S.BUS servos are digitally addressed and can be connected with a single servo line (3 wires). Although 4 servos are installed in one wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analog servos are to be used on the S.BUS, they must be connected using a PWM adapter.
The R7008SB has antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it at lightning speed.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). This allows the measured values to be displayed or acoustically output at the transmitter. In addition, the receiver automatically always transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.
ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!
Features
- 8/18 channel FASSTest receiver
- Telemetry with S.BUS2
- Telemetry with 32 channels
- PWM channels 1-8 or 9-16 selectable
- S.BUS / S.BUS2 port
- Hi-Voltage (HV)
- Antenna diversity
- Pulse switching digital servos
Technical Data Transmission mode: FASSTest Frequency range: 2.4 GHz Channels: 8 PWM / 18 S.BUS Transmit power: 100 mW EIRP S.BUS port: S.BUS / S.BUS2 Voltage range: 3.7 - 8.4 V Weight: 11.0 g Dimensions: 47 x 25 x 14.3 mm
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Futaba |
Customers who bought this item also bought
LiPo battery Red Power XT 5S 4500mAh 25C/50C 18.5V, XT90
Transmitter battery NiMH 9.6V 2500mAh double cube long - JR
Elapor paint orange, 400ml
Servo Y-cable UNI 14 cm
Elapor paint black, 400ml
Cable safe fuse clips
Email me when available again
JETImodel MAX BEC 2
Email me when available again
Servo Sensor SBS01S
Email me when available again
SBS01RB Speed sensor for BL motor speed measurement
Email me when available again
Voltage sensor SBS01V 0 -100 V
Push rod 250mm thread M2x20mm (5 pcs.)
Receiver battery NiMH 4.8V 2500mAh flat
Email me when available again