CGY760R 3-axis gyro receiver with GPB-1 programmer

Successor to the successful CGY750, with the software and functions essentially based on the predecessor CGY750 V2.0. The combination of a flybarless 3-axis gyro with governor and receiver in one component significantly simplifies the wiring in the model. Further advantages are the small size and the low weight. The gyro housing is made of high quality anodized aluminum. 4 holes on the bottom side are used to mount the gyro in the heli. To use the latest software, the firmware can be updated. The use of swashplate servos with 760µs neutral pulse is supported.

Gyro function Improved and faster PID control loop compared to CGY750, variable mounting position of the gyro possible.

Tail Digital servos with 1520µs or 760µs as well as analog servos with 1520µs can be used, Mode 3D or Sport selectable, FeedForward operation for precise tail control.

Roll and Pitch 2 setting modes: F3C or 3D, supports swashplate types: H3-90 / H3-120 / H3-140 / H4-00 / H4-45. 1520µs or 760µs* digital servos and 1520µs analog servos can be used. (* 760µs* in development).

Governor (head speed controller) Improved and faster PID control loop compared to CGY750. Speed control from 700rpm to 4000rpm possible. Digital or analog servos (1520µs neutral pulse) can be used. Governor or speed limiter mode selectable. Stable speed level due to extremely fast control response Connection options for various speed sensors. Telemetry function: transmission of speeds to the transmitter.

Receiver FASSTest (18 channel mode or 12 channel Hi-Speed mode) or T-FHSS AIR. Antenna diversity system for maximum transmission reliability. Telemetry functions: (battery voltage, various sensors via SBUS2 port and RPM). ID-Link connection as with common FASSTest and T-FHSS receivers.

GBP-1 Programming Box Programming box for CGY760R, which is connected to the CGY760R via the "P-BOX" port. Backlit LCD display with resolution 128 x 64 pixels. Operation via 4 edit buttons and beeper, power supply via CGY760R. The parameters of the connected gyro are stored on an internal memory (will not be lost even without battery). Some parameters can be programmed wirelessly in the gyro by connecting the GPB-1 programming box to the transmitter.

Technical data Swashplate types: H3-90; H3-120; H3-140; H4-00; H4-45 Speed range (head): 700 rpm - 4000 rpm Rotation rate:+/- 1200° / s Speed resolution: 6 rpm Servo neutral times: 760 µs and 1520 µs Servo frame rate: 70 Hz (analog), 280 Hz (digital 1520 µs), 560 Hz (digital 760 µs) Operating voltage: 3.8 - 8.4 V Receiver modulation: FASSTest (18 channel/12 channel HiSpeed Mode) or T-FHSS Weight: 20.2 g Dimensions gyro: 37.5 x 26.8 x 16.0 mm

Scope of delivery CGY760 3-axis heli-gyro with receiver and governor GBP-1 programming box Accessory set German instruction manual (download)

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.