Futaba FP05003226-3 T26SZ 26-channel FASSTest remote control with R7214SB receiver incl. LiPo transmitter battery
1079.95 €
1214.04 € UVP*










Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 184.56 € | (8.90%) |
12 Monate | = | 94.28 € | (8.90%) |
24 Monate | = | 49.14 € | (8.90%) |
36 Monate | = | 34.13 € | (8.90%) |
48 Monate | = | 26.67 € | (8.90%) |

Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Futaba T26SZ - 26ch-2.4GHzFASSTest radio with R7214SB receiver The long-awaited successor to the best-selling "T18SZ", the new T26SZ is now official! The new T26SZ is positioned between the high-end T32MZ-WC series loved by many competitors and the mid-range T16IZ-Super model. For pilots who fly anything and everything, demand unquestioned reliability and are looking for a future-proof radio that offers the highest level of programming capability, Futaba's T26SZ is not to be overlooked. With its user-friendly interface, dual screens, silky smooth non-contact Hall-effect gimbal, near-identical 32MZ capabilities, sleek design and the latest FASSTest 26ch protocol, the T26SZ will most likely cover all the items on your extensive wish list. It is a masterpiece comparable to the high-end class and can be described as the result of Futaba's many years of know-how and solid results.
S.BUS2 SYSTEM Multiple servos, gyros and telemetry sensors can be easily installed with a minimum of cables.
MAIN LCD COLOR DISPLAY HVGA 4.3" full color LCD with backlight and transflective touchscreen (visible inside and outside).
SECONDARY LCD DISPLAY A high-quality, reflective LCD display for easy recognition of telemetry data.
SD CARD PORT The microSD port allows you to update software, save model data and upload image files.
HIGH CAPACITY LIPO BATTERY 2100mAh offer a comfortable operating time and real safety.
INTUITIVE PROGRAMMING Model-specific programming and editing has never been so easy.
MULTIPROP CHANNEL EXTENSION With the MPDX-1 multiprop decoder (sold separately), one channel can be split into eight channels. Two MPDX-1s can be used.
FEELS GOOD Non-contact potentiometers with magnetic sensing provide fine, ultra-precise and durable operation. An external adjustment screw for the throttle lever allows adjustment via a ratchet or self-neutralizing spring.
SWITCH REPLACEMENT Replace four of the toggle switches on the right and left shoulder with a two or three position switch of your choice or a momentary switch.
Features:
- The T26SZ transmitter can be set to either Mode-1 or Mode-2 in the software. Please refer to the manual for more information.
- FASSTest26, FASSTest18, FASSTest12, S-FHSS & T-FHSS protocols
- 26 channels (24+2)
- Full-color 4.3-inch touchscreen
- 3.0-inch LCD sub-display
- High quality finish
- Model image display
- Smooth-running, non-contact stick potentiometer
- Upgrade/replacement of the shoulder switch
- Four rear sliders (in pairs)
- Vibration alarm
- Voice function
- Telemetry system
- Four stick modes (1-4)
- Software update via MicroSD card
- LiPo with high capacity
- USB-C charging
- Headphone jack
- Calendar clock
- S.BUS I/F activated
- Wireless trainer system
- ±240 levels Sub-Trim
- Sub-Trim Balance
- DLPH-2 settings
- Connection for setting the receiver mode
- Gyro setting for CGY755 / 760R / 770R / GYA553
- 8 flight modes
- 30 pre-programmed mixers
- 10 freely programmable mixers
- Sequencer for retraction and doors
- 13 fixed-wing types
- 3 fixed-wing tail types
- 2 fixed-wing rudder types
- 8 helicopter swashplate types
- Supports 14 telemetry sensor types
- GPS enabled
Main programming features:
- Model name (15 characters)
- Sub-trim
- Sub-trim balance
- Servo reversal
- Fail-safe
- Exponential
- Throttle
- Endpoint / ATV (30 - 140%)
- Servo speed
- Trainer function
- Servo monitoring
- Trim setting (step, rate, mode)
- Data editor (for S.Bus devices)
- 10 programmable mixers
- 30 pre-programmed mixers
- Aileron differential
- Air brake
- Flap trim
- Flap adjustment
- Butterfly
- Camber mix
- Camber flap to elevator
- Elevator to camber
- Aileron to flap
- Aileron to rudder
- V-tail
- Elevator
- Winglet
- Aileron to airbrake
- Snap roller
- Servo monitor
- Twin timer
- Stick alarm
- Battery fail-safe
- Gyro sensor
- Multiple motors
- Motor mix
- State name
- AFR (Dual Rate)
- AFR (curve mode)
- AFR curve point number (17 points)
- Logic switch (condition switch only)
- Acceleration mix
- Pitch curve / pitch trim
- Throttle curve / throttle floating trim
- Pitch needle mix
- Speed mix
- Swash ring
- Idle down
- Throttle limiter
- Swashplate
- Swash AFR
- System timer
- Setting the function
- Regulator
Telemetry functions:
- Temperature
- Speed (magnetic and optical)
- altitude
- GPS
- voltage
- Receiver battery
- Amperage
- Data recording
Included in the scope of delivery:
- T26SZ 26-channel transmitter
- R7214SB receiver
- 7.4V 2000mAh Li-Ion Tx battery pack
- USB-C charging cable
- Lanyard
- Tool kit
- Quick start guide
This product is manufactured by: Futaba Corporation Chosei-mura, Chosei, Chiba Prefecture 299-4395 1080 Yabutsuka Japan www.futaba.co.jp Phone: 81-475-32-4395 [email protected]
This product is manufactured by: Minicars Hobby Distribution AB Annelundsgatan 17C 749 40 Enköping Sweden [email protected]
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Anzahl Kanäle | 26 |
Art | Handsender |
Hersteller | Futaba |