COCKPIT SX 9 Set TX/RX
474.95 €
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 81.17 € | (8.90%) |
12 Monate | = | 41.46 € | (8.90%) |
24 Monate | = | 21.61 € | (8.90%) |
36 Monate | = | 15.01 € | (8.90%) |
48 Monate | = | 11.73 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Cockpit SX 7/9-channel M-LINK remote control - easier than ever!
-The MULTIPLEX COCKPIT SX 7/9, the further development of the popular and proven RC system for the future-oriented beginner and demanding hobby pilot. -The COCKPIT SX 7/9 is 100% developed and built in Germany. Quality Made in Germany! -TFT color touch display clear, transflective color display 3.5, 320x240 pixels, touch screen with meaningful symbols and large, easy to read numbers/letters. -Readable in sunlight without backlight: optimal for model sports. In outdoor operation -extremely power-saving due to automatic day / night switching. Transmitter operating time up to 24 hours possible. -Simple and extensive programming options via new model wizard.
-Intuitive operation through a sophisticated touch concept with clear screens and many self-explanatory graphics. A convenient model assistant with a wide range of options for adjusting values via the touchscreen. Simple adjustment via slider, direct value entry with alphanumeric keypad, +/- and buttons for fine adjustment ensure the simplest programming of your models.
-Super comfortable model memory management -The COCKPIT SX 7/9 is equipped with 200 internal model memory locations, the model memories are stored on the internal SD card in .xml format. Convenient model memory management on the PC via USB mass storage is therefore easily possible. -Excellent voice output -With over 450 words, numbers and phrases, it is one of the most advanced systems of its kind ever built into a handheld transmitter.
-Using this system allows COCKPIT SX 7/9 pilots to perceive critical telemetry data and transmitter functions without taking their eyes off the flight. The COCKPIT SX 7/9 tells them the specific sensor readings when needed Should an alarm ever be triggered, you don't have to look at the display to see what's going on, the COCKPIT SX 7/9 will tell you.
-Return channel/Telemetry
-When using a telemetry capable receiver, the current voltage of the receiver power supply is shown on the transmitter display. If the voltage falls below an adjustable min. voltage, an acoustic signal warns of a receiver battery that is running low. Without a sensor, the link quality (LQI) can also be shown on the transmitter display in % values.
-An additional safety plus!
-In addition, up to 8 telemetry data from the model (depending on the sensors connected to the receiver, e.g. voltage, current, temperature, etc.) can be shown on the display (application examples: Motor temperature, drive battery voltage, drive current consumption).
-The telemetry data is stored in the model in conjunction with the optional MULTIPLEX FlightRecorder (# 8 5420). -The display of the sensor values in the display is freely configurable, dynamic adaptation of the displays.
-Wireless instructor/student operation
-The COCKPIT SX 7/9 M-LINK can be both an instructor and a student transmitter as standard. All L/S compatible M-LINK transmitters can be used as student or teacher transmitters. The optional COPILOT module (# 4 5184) is required for teacher operation. The COCKPIT SX 7/9 works with selective L/S operation. This allows complete handover or, individually depending on the student's learning progress, handover of individual control functions to the student. The instructor can only take over the model again by touching the sticks.
-Dual rate and expo can be set separately for each phase -For 3 axes (aileron, elevator, rudder) plus expo for throttle.
3 timers
- Timer 1: mm:ss start/stop switch selectable, alarm function, voice output, vibration
- Timer 2: mm:ss start switch selectable, alarm function, voice output, vibration
- Timer 3: hh:mm Transmitter operating time counter
-Helpful videos on menu navigation and programming can be found at: MULTIPLEX FAQ Videos -Future-proof through software updates -MULTIPLEX is constantly developing the COCKPIT SX 7/9 software. You can always update your remote control to the latest version free of charge via the MULTIPLEX Launcher at www.multiplex-rc.de. -Features: COCKPIT SX 9
- LiFe battery 3.3V/4000mAh
- SD card
- 2 proportional encoders
- 6 switches
- 2 pushbuttons
Technical features:
- future-oriented 9-channel remote control - 9 fully proportional control channels
- 32 bit ARM7 processor
- 2.4 GHz M-LINK transmission secure ultra-fast digital signal transmission with real-time telemetry
- analog and digital servo mode
- IOAT antenna - integrated radiation optimized antenna technology with extremely high range
- 3.5 large new TFT color touch display with telemetry display and DAY/NIGHT switching, daylight-RIGHT
- 4-fold ball bearing mounted stick units (mechanics of the PROFI TX)
- Completely equipped with all necessary controls and switches
- Voice output (D,E,F) via loudspeaker or earphone jack
- USB socket (transmitter battery charging, PC interface for firmware updates, data management
- Modern, ergonomically optimized housing design
- Low weight
- 2.4 GHz transmission technology M-LINK integrated
- USD card for model storage
- Long operating time up to 24h
Software features:
- Smartphone-like operation due to clear and concise menu structure
- Model assistant guides you through programming
- Slide - function - e.g. PITCHCURVES adjustable by touching and dragging
- Predefined templates for almost all common surfaces and helicopter models
Field of application a. o: -GLIDER 2 FLAPS -SEGLER 4 flaps + interference flaps -V-LEITWERK -POWERED AIRCRAFT -ARTICULATED AIRPLANES -Jets (DELTA) -NURFLÜGLER -HELI 120 degrees -HELI 90 degree flybarless -MULTICOPTER
- Safety: gas check, transmitter battery monitor
- Intelligent voice output D / E / F
- Announcement of telemetry data, warnings, alarms and vario signal via loudspeaker or headphones
- Real time data transmission
- Optional sensors (vario, GPS, fuel, temperature, voltage, current, RPM and more)
- Vibration alarm, as well as warning LEDs for critical alarms
- Digital trim, flight phase specific switchable for heli flybarless systems and MULTICOPTER
- 3 timers with voice output
Freely adjustable encoder mode (aileron, altitude, side, throttle, spoiler) (1x total time timer, 1x motor running time, 1x transmitter operating time)
- Numerous servo settings (travel, limit, reverse, center position)
- Dual rate and expo, separately adjustable for each flight phase
- 3 flight phases (wing)
- 4 flight phases (heli)
- Heli GAS and pitch curves (9 points) adjustable separately for each flight phase
- Aileron differentiation, adjustable separately for each flight phase
- snapflap
- butterfly function
- FREE SERVO ASSIGNMENT
- Wireless instructor/student operation possible with optional COPILOT
- Multifunctional USB socket(transmitter battery charging, PC interface for firmware updates, data management)
- USD card for model storage - 200 model memories
- Model copy function
Scope of delivery: -Transmitter with 9 channels -receiver RX-9-DR M-LINK -charging cable USB-A plug to USB Mini B 5-pin -Instruction manual
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Anzahl Kanäle | 9 |
Art | Handsender |
Hersteller | Multiplex |