SM-2-4Q Switching module
29.95 €
Not available at this time Notify me when available
The SM-2-4Q switch module can be used to switch consumers (e.g. motors, lamps, pumps, etc.) with a high current consumption (up to 10A). The SM-2-4Q can therefore be used if, for example, the possible switching current of the sound module output is not sufficient for the connected consumer. As a reminder at the sound module USM-RC-2 a current per output of 1.5A is possible, the sum current of all outputs must not exceed 3.0A.
The switching module is usually controlled via the outputs of the sound module or via the outputs of a multiswitch module. Both inputs of the SM-2-4Q are minus-switching, i.e. the connected sound or switch module must also have minus-switching outputs.
The SM-2-4Q can be used in 2 operating modes, the switch mode and the motor mode.
In the switching mode, 2 consumers can be switched individually.
In motor mode, 1 motor can be controlled in 2 directions.
Technical data: Supply voltage (Ub): 6 - 14V DC voltage Current consumption: Quiescent current: approx. 4mA Switching inputs: 2 pieces minus-switching Integrated pull-up resistors (4k7) Switching outputs: Switching mode: 2 outputs, continuous current 2 x 7A, short-time max. 10A, open collector (npn) Motor mode: 1 output for 1 motor with clockwise and anticlockwise rotation, continuous current 5A, short-time max. 10A Soft start: Switch mode: 0s or 1s Motor mode: 0.5s or 2s Reverse direction lock: 0.5s or 1s Overcurrent shutdown: Electronic overcurrent shutdown at approx. 20A Undervoltage shutdown: At a supply voltage < 5.3V Dimension: 69 x 30 x 10mm Weight: 15g
Scope of delivery: 1x switch module
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | BEIER-Electronic |
Please send me an email as soon as the item is available