Touch Duo Racing AC/DC 400W Charger/Discharger 1-6S

Touch Duo Racing AC/DC 400W Charger/Discharger 1-6S

MIBO Touch Duo Racing AC/DC 400W is a dual channel charger-discharger with touch screen display. It also features a balancer with a capacity of up to 200W per channel for all battery types (NiMH, NiCd, LiPo, LiHV, Li-ion, LiFe and lead-acid batteries). The charger can be powered from a 100-240 V/50-60 Hz mains supply or a 12 V car battery or suitable stabilized power supply.

The MIBO Touch Duo Racing is equipped with an intelligent and user-friendly software, which offers many useful functions and includes

• a program for new "high-voltage" LiHV batteries with a terminal voltage of up to 4.35 V
• the final voltage setting for charging and discharging lithium batteries (allows soft charging, preferred by aviators, or overcharging, which is popular in the car scene.
• the final voltage setting for charging and discharging lead-acid batteries (enables safe and optimal charging of all types of lead-acid batteries)
• measurement of total voltage and individual voltage of each cell (for lithium batteries) even without charging/discharging
• a MicroUSB port for firmware updates
• with mains supply, both channels can also serve as a stabilized power supply from 0.1-28 V with an adjustable current limiter from 0.1-20 A (up to 200 W)
• Charging smart batteries for drones (3S LiPo, 4S LiHV, 6S LiHV).

Basic functions and parameters at a glance:

• Input voltage 10-30 V DC - for full charger performance, the power supply must be at least 24 V.
• Mains supply 100-240 V/50-60 Hz
• Charging and discharging of 1-15 NiCd/NiMH cells, 1-6 Li-Ion/LiPo/LiFe/LiHV cells or 2-20 V lead-acid batteries
• Adjustable charge current (0.1-20.0 A) in 0.1 A steps
• Adjustable discharge current (0.1-5.0 A)
• With mains voltage, division of charging channels (2x 200 W, 1x 400 W, 300 W/100 W, 100 W/300 W) is possible
• Max. Discharge power of 25 W per channel
• Automatic charge and discharge mode for NiCd and NiMH with adjustable current limitation
• Charge termination with delta-peak method for NiCd and NiMH batteries
• Lithium and lead batteries are charged according to the "constant current/constant voltage" method
• Adjustable sensitivity of delta peak detection for NiCd and NiMH batteries
• Adjustable final voltage for charging and discharging lithium and lead batteries
• Repeatable charge/discharge or discharge/charge cycle for NiCd and NiMH batteries, up to 5 cycles
• Three charging modes for lithium batteries - normal charge, symmetrical charge, charge / discharge from battery.
• Termination of charging when the set time or charging voltage is exceeded
• Memory for 8 charge/discharge programs.
• Measurement of total pack voltage and individual cell voltage (for lithium batteries).
• Measurement of total internal resistance of the pack and individual cell resistance (for lithium batteries)
• In case of mains supply, there is a possibility to use both channels as a stabilized power supply with an output voltage of 0.1-28 V with an adjustable current limit of 0.1-20 A (max. according to the assigned power for the channel) to supply other electrical devices
• Programs for charging smart drone batteries (3S LiPo 11.1 V, 4S LiHV 15.2 V and 6S LiHV 22.8 V)
• Micro USB port for firmware updates from PC and charger
• USB output 5.0 V/2.1 A for powering/charging cell phones, tablets and similar devices
• Backlit LCD touchscreen with simple and intuitive menu and parameter display during charging/discharging
• A number of warning messages contribute to safe operation - incorrect input voltage, reverse polarity at input, unsuitable battery or battery condition, incorrect polarity at output
• Protection against reverse polarity and short circuit at the output
• Compact aluminum housing
• Built-in fans for forced cooling

The charger is equipped with XT60 connectors on both channels and comes with 2 JST-XH service adapters that allow direct connection of power cables and JST-XH connectors of 2-6S LiPo packs. If you use packs with XT60 and JST-XH connectors, you do not need an additional charging cable. You can use common Sky RC or RC system adapters to connect service connectors from other systems.

Technical data: Input voltage (DC): 10 - 30 V Input voltage (AC): 100 - 240 V Charging current channel 1: 0.1 - 20 A Charging current channel 2: 0.1 - 20 A Charging power channel 1: 200 W Charging power channel 2: 200 W Discharge current: 0.1 - 5 A Power when discharging: 25 W Number of channels: 2 NiCd: 1 - 15 cells NiMH: 1 - 15 cells LiPo: 1 - 6S Li-Ion: 1 - 6S Li-Fe: 1 - 6S Li-HV: 1 - 6S Pb: 1 - 10 Balancer: Yes Balancer current: 500 mA Length: 195 mm Width: 143 mm Height: 70 mm Weight: 1072 g

The charger set contains: MIBO Touch Duo Racing charger 2x XT60/XT60+Dean-T charging cable 2x JST-XH Balancer Adapter 2-6S 2S LiPo hardcase charging cable 4mm banana/XT60 power cable Power cable User manual

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.