Charger D100 V2 DUO LiPo 1-6s 10A 2x100W Voice Guide, Scan

D100 V2 Duo - the 2nd generation with new features like Voice Guide, Scan-to-Go and power supply usage!

The SKYRC D100 is a 2-channel charger with two independent circuits to charge two types of batteries in parallel. Through active power distribution, the D100 always provides the maximum possible power to each channel to shorten charging times. The D100 can also be connected to a PC for control and firmware update. The D100 can also be used as a lithium battery meter or to measure internal resistance. For safety, the D100 has a number of automatic safety shutdowns such as charge current limit, capacity limit, max. temperature or charge time.

Features:

• 2-channel charger: the SKYRC D100 allows you to connect and charge two different types of batteries at the same time.
• Autom. energy distribution: In AC mode, the max. energy (100W) is automatically and optimally distributed to the two outputs. e.g. channel A = 70W and channel B = 30W.
• Data memory: The data of up to ten accumulators per output can be stored and recalled for comparison if required.
• Terminal Voltage Control (TVC): The user can manually set the final battery voltage, so especially when racing the maximum permissible final voltage can be set and reached according to the rules.
• Built-in Lithium Battery Balancer: The charger uses a built-in balancer which monitors and balances the individual cell voltage. It is therefore not necessary to connect an external balancer.
• Balancing during discharge: Even during discharge processes, the D100 Duo can monitor individual cells and balances each cell separately. If it detects abnormal voltage of a single cell, the process is aborted and an error message is displayed.
• Lithium Battery Types: Different types of lithium batteries are supported, such as lithium-ion, LiPo and LiFePo batteries.
• Shutdown by capacity: If a maximum value for the charging capacity has been set, the charging process is automatically stopped as soon as this capacity has been reached.
• Shutdown time: As a further protection, the maximum time for a process can be set to automatically end the process when exceeded.
• Temperature shutdown (only with optional temperature sensor): A battery gets warmer and warmer during charging due to the chemistry inside. When the previously set temperature is reached, the process is automatically terminated.
• Case base with tilt adjustment: The base is adjustable in tilt to obtain individual comfortable operation and a good view of the display.

Top features:

• LiHV charging mode: ready for the next generation of LiPo batteries. This mode provides a battery end voltage of 4.35 volts / cell and thus for more power in your model. However, be sure to check first that it is also a LiHV battery.
• Fast & Storage Charging: The "FAST" & "STORAGE" mode is available when charging lithium batteries. When charging in "FAST" mode, the battery will not hold capacity as long as when charging in "STORAGE" mode. Therefore, the "STORAGE" mode is ideal when a battery is to be stored for a longer period of time.
• Re-Peak Mode: In Re-Peak charging mode of NiCd or NiMH, the battery is automatically charged up to 3 times to the PEAK value. This ensures that the battery is 100% fully charged.
• Cyclic charge / discharge: Here, the battery is charged up to 5 times and immediately discharged again. It is optimal to reactivate older or damaged cells or to equalize the cells of a pack.
• Battery Meter: It can check and measure the total voltage, highest voltage, lowest voltage and voltage of each cell.
• LiPo Internal Resistance Meter: It can measure the internal resistance of each cell or the complete pack.

Optional software Charge Master With this software, the user can monitor the charging process on the PC, such as the battery pack voltage, cell voltage and other useful values, of course, everything in real time and also as a graphic. In addition, the charger can be controlled via the software from the PC and the firmware can be updated.

Optional smartphone APP for the charger Smartphone control via Wi-Fi module (for iOS and Android). This charger can be controlled and monitored via smartphone and optional Wi-Fi module (SK600075). This is extremely convenient and important especially on races because you are not always at the place to perceive the current status, a power failure or error.

Technical data: Input voltage: AC 100-240V / DC 11-18V Charging power DC input: 2 x 100W | AC input: 100W (with active distribution) Discharge power: 2 x 10W charging current: 0.1 - 10.0A Discharge current: 0.1 - 5.0A Balancer current max: 300mA / cell Trickle charge current: 50mA - 300mA & OFF Case Material: Plastic Maximum cells: LiPo/LiFe/LiIon: 1-6 cells | NiMH/NiCd: 1-15 cells | Pb: 2-20V Weight: 668 Dimensions (LxWxH): 153x140x67mm

Scope of delivery: 1x charger 2 x XH balancer adapters 2 x charging cables 2 x charging cables with XT60 connector 1 x power connection cable Manual

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.