FOXY 700 Race 9.6V brushed DC electric motor

DC electric motor size '700' with rated voltage 9.6 V. Operating voltage range 4.8-20V, speed at rated voltage 18000rpm. Diameter 42.2mm, housing length 66mm, shaft diameter 5.0mm, weight 370g.

FOXY Brushed series DC motors are perfect for a whole range of modeling applications - for powering aircraft, ships, cars, tanks and other land vehicles with direct drive and gearbox.

When installing and connecting FOXY Brushed motors, make sure that you do not exceed the permissible values for supply voltage and current load.

Cooling of the motor: During operation, the temperature of the outer housing of the motor should not exceed 80° C. Therefore, in the model it is always necessary to ensure sufficient access of cooling air and its flow around the motor. For marine models, we recommend the use of water cooling. High engine load is possible only for a short time. After each flight / trip, the motor must cool down to room temperature before you start again.

FOXY 700 Race 9.6 V is a '700' size DC electric motor with 5.0 mm diameter shaft and plain bearings, suitable for powering direct drive (9x4" propeller) or geared, small car and ship models (35-40mm propeller).

To control its speed you need an electronic controller with a load capacity of 60-80 A.

FOXY 700 Race 9,6 V is a suitable replacement for Speed Motor 700 Race 9,6 V.

The motor set contains

• The motor FOXY 700 Race 9,6 V
• The manual

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.