Kavan 3BD1035 FOXY 700 BB Turbo 12V brushed DC electric motor

DC electric motor size '700' with nominal voltage 12 V. Operating voltage range 7.2-20 V, speed at nominal voltage 11600 rpm. Diameter 42.2mm, housing length 66mm, shaft diameter 5.0mm, weight 350g.

The FOXY Brushed series of DC motors are perfect for a whole range of modeling applications - for powering aircraft, ships, cars, tanks and other land vehicles with direct drive and gearbox.

When installing and connecting FOXY Brushed motors, make sure that you do not exceed the permissible values for supply voltage and current load.

Cooling of the motor: During operation, the temperature of the outer casing of the motor should not exceed 80° C. Therefore, in the model it is always necessary to ensure sufficient access of cooling air and its flow around the motor. For marine models, we recommend the use of water cooling. High engine load is possible only for a short time. After each flight / trip, the motor must cool down to room temperature before you start again.

FOXY 700 BB Turbo 12 V is a "700" size DC electric motor with 5.0 mm diameter shaft and sleeve bearings, suitable for powering aircraft models with direct drive (9x4-6" propeller) or with gearbox, for small car and ship models (ship propeller 40-45mm).

To control its speed you need an electronic controller with a load capacity of 60-80 A.

FOXY 700 BB Turbo 12 V is a suitable replacement for Speed Motor 700 BB Turbo 12 V.

The motor set contains:

• The motor FOXY 700 BB Turbo 12 V
• The manual