Quicrun Fusion Pro Combo for Rock Crawler 2300kV

Hobbywing Quicrun Fusion Pro Combo for Rock Crawler 2300kV

The QuicRun Fusion Pro is the further development and improvement of Hobbywing's first 2in1 combo, the regular Quicrun Fusion. So 1/10 crawlers get space and weight saving motor and controller in one. Now even stronger and better.

Often in the car space is limited and there is little room to accommodate the various cables and neatly. But this is now finally an end. With a length of only 58mm and thus just as large as a typical motor and with a weight of only 209g, you do not notice that here motor and controller are combined. Thanks to the intelligent torque and speed control, a crawler with this combo can adapt to any situation without any problems. Of course, the Fusion Pro is equipped with an excellent waterproof and dustproof casing. So the fun really knows no bounds. Even the electronic switch is protected accordingly.

The technology used is called FOC (Field-Oriented-Control) and is responsible for this super control feeling. The performance of this drive has increased by a whopping 8% compared to its predecessor and the power consumption has even been reduced by 30%. Thus, less battery capacity is consumed and the driving time is extended.

Features:

• 2in1: motor and controller combined in one.
• Compact design ideal to gain space and reduce weight
• Clearly noticeable improvement in performance
• FOC drive, ideal for crawlers
• 3 operating modes

t> Normal (Forward, Reverse with brake) t> Normal (Forward, Reverse) t> Constant speed (forward, reverse)

• Refined parameter settings and 4 new parameters

t> Max. Brake force t> Speed decrease rate t> Punch t> Neutral range

• Powerful torque even at slow speeds
• Suitable for all weather and track conditions
• Powerful built-in BEC with voltage switching function
• Various safety mechanisms against: Undervoltage, overheating, gas loss, etc.
• Programmable with the LED programming box

Technical data: Type: Brushless FOC Sensored Current (continuous/short): 60A/200A Number of cells: 2-3S LiPo, 6-9 cells NiMH BEC: 6V/7.4V with 6A Poles: 4 Speed: 2300kV Outer diameter: 37mm Length: 58mm Shaft diameter: 3.175mm Shaft length: 16mm Waterproof: Yes Connection: XT60 Programming:

• LED programming box
• Integrated programming interface

Weight: 209g Application: 1/10 crawler

Scope of delivery:

• Quicrun Fusion Pro FOC motor with built in speed controller
• XT60 connector
• Sticker and manual (English)
• Heat sink kit, double sided tape, cable ties

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.