Bullet ST 3.0 RTR 2.4GHz 1/10 4WD Nitro Stadium Truck

READY FOR THE POWER OF THE BULLET ST 3.0?

The extremely popular HPI Bullet ST 3.0 has been given a completely new look and is sure to impress its fans! This super stable off-road machine is ready for lots of driving fun at your command!

The Bullet ST 3.0 can handle any kind of obstacle, as it is virtually unstoppable thanks to its immense power from its powerful HPI Nitro Star G3.0 engine and 4WD drivetrain. High speeds and breathtaking jumps have never been more fun! The Bullet Truck's durable and rugged design speaks an unmistakable language - driving fun guaranteed!

Underneath the brand new paint scheme, the Bullet 3.0 shines with a solid 8-damper double wishbone suspension, a sturdy drivetrain, metal gears and a reliable 2.4GHz radio control system. All that's needed is fuel for the engine - and nerves of steel to control the powerful Bullet 3.0!

The Bullet ST includes a checkered body with a low and aerodynamic design including a rear spoiler for extra downforce. The truck bed even has an angled cover to lower drag and direct air over the spoiler. The paint is an all-new design in black, silver and orange - combined with street-style 5-spoke chrome wheels in black for a complete look! The front styling is enhanced with the classic pickup truck look with the grille and front headlights, and the roof sills complete the powerful look of the Bullet Truck. Further racing accents are added by the front and rear bumper and window details including roll cage and window nets.

2.4GHZ RADIO CONTROL SYSTEM The latest HPI models are now equipped with a new, convenient HPI 2.4GHz radio control system! This is a "pistol-shaped" remote control with steering wheel that features a realistic steering wheel, servo reversing and adjustable steering angle. It is also extremely lightweight and only requires 4 AA batteries or rechargeable batteries. Changing crystals is now a thing of the past, the 2.4GHz controller automatically searches for a free channel. If a channel is occupied, the system immediately selects another channel, so that interference is avoided. If the signal is lost or the transmitter battery runs out, an electronic failsafe brings the model to a controlled stop. So you get a professional remote control and that in an RTR package.

PROTECTED ELECTRONICS The Bullet 3.0 features a protected receiver box for receiver pack and receiver, and shines with waterproof steering and throttle servos, so the Bullet can be used in the most extreme conditions! Want to drive in deep mud? Crossing a low creek? Drive when it's raining? No problem for the Bullet ST 3.0! Please note: This HPI vehicle can be driven in wet conditions (e.g. rain, snow), but not underwater. See the manual for more details.

SOLID ALUMINUM CHASSIS Molded from 6061 aluminum for the best combination of strength and lightness, the Bullet 3.0 chassis is solid, cool looking and provides the backbone for all the various components that make Bullet trucks so strong! The kick-up front provides extra control at any speed, which is critical for a no-compromise truck like the Bullet. The sides are slightly angled to keep the chassis from bottoming out in tight turns and to optimize overall rigidity - perfect for all off-road adventures!

COMPACT & BALANCED LAYOUT The Bullet 3.0 is packed with sophisticated features. All components sit in calculated locations to achieve perfect weight distribution from front to rear and side to side. The steering servo is in a flat-lying position for a low center of gravity, and the weight of the motor and battery balance each other so that both sides of the chassis are equally heavy. The ESC is positioned in the rear of the chassis along the centerline as it gets the most cooling air and is also protected from mud and dirt.

SOLID 4WD SHAFT DRIVE The drivetrain used in all Bullet Trucks is a permanent 4-wheel drive, which is also used in the World Champion HB D815 buggy. A cardan drive is the best option for models that are used in hard and dirty terrain. The drivetrain works reliably and you do not have to worry when you race through grass, mud, water, dirt, dust, snow or anything else!

nitro-powered fun A sturdy plastic gear takes power from the motor and delivers it to the front and rear axles through an adjustable dual pad slipper clutch. Bones in the center control bevel differentials on the front and rear axles, which have 4 internal gears for durability. Maximum braking power is guaranteed by the adjustable steel disc brake at all times!

STEEL DRIVE BONES Extra-sturdy parts are a key feature of all Bullet Trucks and, of course, no exception was made for the drive shafts. Extremely strong, coated steel drive bones transfer power from the front & rear differentials to the wheels. There is a nylon hex miner on each steel wheel axle and sturdy steel wheel nuts provide a secure hold for the wheels.

EFFICIENT BALL BEARINGS For maximum efficiency, the entire drive from the main gear to the wheel axles has been equipped with rubber sealed ball bearings. With these bearings, battery life and motor longevity is extended, while the ball bearings are protected from debris by the rubber seals!

STURDY & LONG CONTROL ARMS Extra-long control arms provide stability and thick axle pins further reinforce that stability. Both shocks on each control arm are protected by the control arm. This makes it less likely that the dampers will be damaged in accidents. The control arms have an extremely stable design that was created for the most extreme conditions. Various damper mounting locations offer you the possibility to adapt the vehicle to various tracks. Nevertheless, the modular setup is very mature and offers you a neutral driving behavior on almost all surfaces!

TWO SHOCKS AT EACH CORNER 8 extra long shocks provide optimal damping for the Bullet ST 3.0. They were precisely filled by us and prepared for big jumps and hard landings. They offer long travel, have large springs and are the perfect choice for the long wishbones! The shocks can be perfectly adjusted to different track conditions with the help of our HPI spring and shock oil range.

FLEXIBLE PLASTIC PARTS The C-hubs and wheel carriers are made of extra strong plastic that can withstand the toughest conditions. The front hubs also have a large stone guard that protects the bones and wheel axles. Without much effort, the truck can be lowered without tuning parts by changing the shock positions (great for onroad racing) by changing the shock position on the control arms.

WATERPROOF GAS AND STEERING SERVOS The HPI SF-10W waterproof servo is used twice on the Bullet 3.0 - one SF-10W easily handles the steering of the front wheels and another SF-10W controls the carburetor and brake positions. The HPI SF-10W is powerful and reliable. It handles jumps and accidents with ease thanks to the high-quality servo saver. Additionally, it is waterproof, so it is perfect for this truck!

ADJUSTABLE STEEL TRACK RODS Sturdy threaded steel rods connect the servo to the steering levers via the reliable steering system. For advanced tuning, you can adjust toe and camber through the lightweight and sturdy threaded track rods. For certain tracks, this can give you an advantage. DURABLE ALLTERRAIN TIRES The extra cool-looking Allterrain tires offer plenty of grip on loose as well as firm surfaces, grass, mud and more. And even when the big tread dots are worn down, line pattern tread continues to provide fantastic grip for a long time. The tires are securely attached to the black chrome plated rims with tire adhesive!

HPI Nitro Star Power!

The Nitro Star G3.0 engine is the heart of the Bullet 3.0 Nitro models. It's loud, powerful and capable of immensely high speeds without sacrificing acceleration! The engine is started by a simple pull-start system and is reliably protected by a unique water splash cover and a 2-stage air filter. In addition, the 2-needle carburetor lets you adjust the engine's performance extremely precisely for optimum results! With Nitro Power you can have fun all day - you only have to stop for fuel!

Nitro Star G3.0 Specifications Displacement: 3.01cc (0.18 cubic inch) Bore: 16.8mm Stroke: 13.6mm Power: 2.2hp @ 31,000 rpm Maximum RPM: 32.000 RPM Carburetor: F2-6.5 (plastic 6.5mm), slide type with 2-needle adjustments ABC Components: Aluminum pistons with chrome coated sheet metal sleeves or cylinder 2-piece racing clutch 75cc fuel tank Aluminum cooling head Dual foam air filter with rain cover

Features:

• Factory pre-assembled & pre-painted 4WD Stadium Truck.
• 2.4GHz radio control system
• Waterproof battery/receiver box
• Powerful and reliable Nitro Star G3.0 engine
• Easy to use pull starter
• Large 75cc fuel tank for long run times
• Waterproof throttle & steering servos
• Pre-painted and decaled body, ready to go!
• 6061 aluminum chassis as ideal base platform
• Solid bumpers combined with skid plates protect the whole vehicle
• 8 oil filled shocks
• Extra long sturdy control arms
• Proven racing design
• Steel track rods, allow optimization of handling!
• Sealed drivetrain, maintenance free and stable!
• Double-pad slipper clutch design for added drivetrain protection
• All-terrain tires with cool chrome rims in black
• Smart metal washer protects against overtightened lug nuts
• Additional tuning options are included with the model

DIMENSIONS: Length: 417mm Width: 336mm Height: 160mm (Adjustable) Wheelbase: 272mm Track: 263mm Drive: 4WD

DELIVERY: 1:10 scale 4WD electric stadium truck with Nitro Star G3.0 engine, 2.4GHz radio control system and painted stadium truck body, 4x AA batteries for the transmitter and receiver pack.

WHAT IS NEEDED: Fuel Fuel bottle Glow plug connector

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.