Tamiya 58682BLSET Audi V8 4WD touring car 1:10 TT-02 kit brushless complete set

Audi V8 4WD touring car 1:10 TT-02 kit brushless edition complete set + ball bearings

Now in a power package with brushless combo! Thanks to the brushless drive, the vehicle has significantly more power and a longer driving time. In addition, a brushless motor has a higher efficiency and is even Lipo-compatible! It comes with all the accessories required for operation, i.e. transmitter & receiver, Lipo battery, Lipo charger and steering servo! The Audi V8 raced in the German Touring Car Championship (DTM) in 1991. This V8 was driven by Frank Biela, who won a total of 4 races this season and secured the overall title at the end of the season.

The 58682 Tamiya model in 1:10 scale is based on the TT-02 chassis. The wheelbase, ground clearance, track and gear ratio can be adjusted in many ways and the chassis can be quickly tuned into a racer with the countless optional tuning parts. The 4WD drive with central shaft, double wishbones and suspension struts on all four wheels ensure a true-to-life driving experience and optimum traction. The underside of the chassis has an extra smooth design and the battery compartment accommodates all standard battery types. The wheel drivers, which have attached dummy brake disks, are a visual highlight.

Features:

• Beginner-friendly TT-02 chassis - extremely robust
• Encapsulated 4WD all-wheel drive
• Polycarbonate body true to the original
• Decal sheet car No.45 from 1991 Frank Biela
• Side mirrors
• 2-piece rims with slick tires
• Independent front and rear suspension
• Many optional tuning parts available

Technical data Scale: 1/10 Drive: 4WD all-wheel drive Length: 463mm Width: 188mm Wheelbase: 257mm

Technical data (regulator) Constant current: 50 A Peak current: 300 A Input voltage: 6-9 NiMH, 2-3S LiPo BEC output: 3 A @ 6 V Dimensions: 48.5 x 38 x 32 mm Weight: 90 g Plug connection: T-Plug

Technical data (motor) Specific speed: 3,000 rpm/V (KV) Motor diameter: 36 mm Motor length: 50 mm Shaft diameter: 3.175 mm

Required accessories: Paint for Lexan body (TAMIYA PS-)

Scope of delivery: 1x kit 1x Brushless-Combo 3000KV 1x vehicle-specific ball bearing set 1x Lipo fast charger with automatic switch-off 1x Lipo battery 2s 4000mAh 1x steering servo 3 KG 1x 2-channel remote control

Attention: Since the original motor and controller are removed from the kit, the kit is no longer provided with shrink wrap!

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.