Absima 12241SET ATC3.4BL Hot Shot 4WD touring car brushless 1/10 RTR set Complete set with 2S LiPo and charger

1:10 EP RC Touring Car ATC3.4 Edition 3 - The new Hot Shot Performance - Complete set with 2S LiPo and charger A myth doesn't follow a line, a myth breaks rules. The 3rd generation ATC BL has grown into a super sports car. The combination of sportiness, dynamics and efficiency makes the ATC3.4 special and an exceptional performer. With its 3S Ready heart, supported by the fiber-reinforced "lightweight" chassis, the ATC3.4 delivers race track performance with addictive potential.

Features:

• +60 KM/H fast
• Waterproof speed controller - 3S Lipo battery ready for use
• All-wheel drive
• Fully assembled and equipped
• Incl. 2.4 GHz remote control
• Waterproof brushless speed controller with T-plug battery connector
• Water-resistant and powerful steering servo with 4 kg actuating force
• 3300 KV brushless motor size 540
• Fully encapsulated main drive - prevents the ingress of stones or other foreign bodies
• Aluminum cardan drive with steel mounts
• The vehicle is completely mounted on ball bearings, making it very smooth-running and durable
• Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. when cornering
• Differential outlets made of steel
• 12mm aluminum oil pressure shock absorber adjustable via knurled screw
• Aluminum engine mount
• Steel shafts on the front axle
• Track rods adjustable via right/left-hand thread
• Aluminum chassis stiffeners
• 7mm damper bridges V/H
• Extremely robust bodywork design
• The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many an "accident" without damage
• Metal main gear and motor pinion

Technical data Scale: 1/10 Drive: 4WD Length: approx. 450mm Width: approx. 190mm Height: approx. 125mm Weight: approx. 1425 g Wheelbase: 260 mm Ground clearance: 20 mm Track front/rear: 170 mm Tires: Diameter approx. 65 mm / width 27 mm front Chassis: ATC Viscosity damper oil: 300 v/h Shock absorber spring rate: medium Damper installation length: front 62 mm / rear 62 mm Viscosity differential oil: front 5,000 / rear 5,000 Internal gear ratio: bevel pinion 13T / ring gear 38T Motor ratio: main gear 64T / motor pinion 29T (module 0.6)

Technical data speed controller: Waterproof 50A controller incl. fan 3S LiPo ready for use T-plug battery connector Motor connection via 3.5mm gold contact plugs and sockets Immediately ready to drive Simple calibration Sensorless NiMH 4-9 cells & LiPo 2-3 cells operation Overheating protection 95° Short time load 300A BEC 6V / 3A Operating voltage: 4.8 - 11.1V Motor timing: 18.75 deg. Motor limit with 2S LiPo / 6 cells NiMH = Onroad < 8T / Offroad < 11T Motor limit with 3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T The following functions can be programmed directly via the integrated set-up button Brake power: 25% - 100% Neutral brake: 0% - 40% Driving mode: Forward - brake - reverse or forward - brake Start punch from soft to aggressive Voltage cut-off from none to 3.4V (ex works LiPo cut-off 3.0V/cell) Length: 48,5mm Width: 38mm Height: 32mm Weight incl. cable: 90 g

Technical data Motor Thrust : 3300 KV 27,400 rpm at 7.4 volts 4 poles Operating voltage: 4.8 - 11.1V Size: 540 Housing length: 52.0mm Housing diameter: 36.0mm Shaft length: 14.5 mm Shaft diameter: 3.17 mm Weight: 200 g

Technical Data: Size: Car Standard Actuating force: 4.0 kg at 4.8 V Actuating time: 0.16 sec/60° at 4.8V Gear: Nylon Gear rim: 25 teeth Plug-in system: JR Length: 40.2mm Width: 20.4mm Height: 39,8mm Mounting hole spacing: 49.7 mm Voltage: 4.8 - 6.6V Weight: 43 g 1 ball bearing

Technical data Remote control : 2-channel transmitter 3-channel mini receiver Reverse function Adjustable dual rate and trim Battery compartment for 4 AA cells (not included)

Scope of delivery: 1x vehicle ATC3.4 fully assembled RTR 1x 2.4GHz remote control 1x instruction manual 1x LiPo battery 5200mAh 2S 7,4V 40C Hardcase T-plug 1x charger TK12400 LiPo 2-3S 2,2A

Required accessories:

• Batteries for the remote control