Absima 12241 ATC3.4BL Hot Shot 4WD Touring Car Brushless 1/10 2.4GHz RTR
233.90 €
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 39.97 € | (8.90%) |
12 Monate | = | 20.42 € | (8.90%) |
24 Monate | = | 10.64 € | (8.90%) |
36 Monate | = | 7.39 € | (8.90%) |
48 Monate | = | 5.78 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
1:10 EP RC Touring Car ATC3.4 Edition 3 - The new Hot Shot Performance A myth does not follow a line, a myth breaks rules. The 3rd generation ATC BL has grown into a super sports car. The combination of sportiness, dynamics and efficiency makes the ATC3.4 special and an exceptional performer. With its 3S Ready heart, supported by the fiber-reinforced "lightweight" chassis, the ATC3.4 delivers racetrack performance with addictive potential.
Features:
- +60 KM/H fast
- Waterproof speed controller - 3S Lipo battery ready for use
- All wheel drive
- Fully assembled and equipped
- Incl. 2.4 GHz remote control
- Waterproof brushless controller with T-Plug battery connector
- Water resistant and powerful steering servo with 4 Kg actuating force
- 3300 KV brushless motor size 540
- Fully enclosed main drive - prevents the ingress of stones or other foreign objects
- Aluminum gimbal drive with steel mounts
- The vehicle is completely ball bearing mounted and therefore very smooth and durable
- Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. when cornering
- Differential outputs made of steel
- 12mm aluminum oil pressure shock absorber adjustable via knurled screw
- Aluminum engine mount
- Steel shafts on front axle
- Track rods adjustable via right/left-hand thread
- Aluminum chassis stiffeners
- 7mm shock towers V/H
- Extremely robust body ready designed
- The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many "accidents" without damage
- Metal main gear and motor pinion
Technical data: Scale: 1/10 Drive: 4WD Length: approx. 450mm Width: approx. 190mm Height: approx. 125mm Weight: approx. 1425 g Wheelbase: 260 mm ground clearance: 20 mm Track front/rear: 170 mm Tires: diameter approx. 65 mm / width 27 mm front Chassis: ATC Viscosity damper oil: 300 v/h Spring rate damper: medium Damper installation length: front 62mm / rear 62mm Viscosity differential oil: front 5.000 / rear 5.000 Internal gear ratio: bevel pinion 13T / ring gear 38T Motor ratio: main gear 64T / motor pinion 29T (module 0.6)
Technical data speed controller: Waterproof 50A controller incl. fan 3S LiPo ready for use T-Plug battery connector Motor connection via 3.5mm gold contact plugs and sockets Ready to run immediately Easy calibration Sensorless NiMH 4-9 cells & LiPo 2-3 cells operation Overheat protection 95 Short time load 300A BEC 6V / 3A Operating voltage: 4.8 - 11.1V Motor timing: 18.75 deg. Motor limit at 2S LiPo / 6 cells NiMH = Onroad < 8T / Offroad < 11T Motor limit at 3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T The following functions can be programmed directly via the integrated set-up button: Brake power: 25% - 100% Neutral brake: 0% - 40% Drive mode: Forward - brake - reverse or forward - brake Start Punch from soft to aggressive Voltage cutoff from none to 3.4V (factory LiPo cutoff 3.0V/cell) Length: 48,5mm Width: 38mm Height: 32mm Weight incl. cable: 90 g
Technical Data Motor Thrust : 3300 KV 27.400 rpm at 7.4 Volt 4 poles Operating voltage: 4.8 - 11.1V Frame size: 540 housing length: 52.0mm housing diameter: 36.0mm Shaft length: 14.5 mm Shaft diameter: 3.17 mm Weight: 200 g
Technical data: Size: Car Standard Actuating force: 4,0 Kg at 4,8V Actuating time: 0,16 Sec/60° at 4,8V Gear: Nylon Gear rim: 25 teeth Connector system: JR length: 40,2mm width: 20,4mm Height: 39.8mm Mounting hole spacing: 49.7mm Voltage: 4,8 - 6,6V Weight: 43g 1 ball bearing
Technical data remote control : 2-channel transmitter 3-channel mini receiver Reverse function Dual rate and trim adjustable Battery compartment for 4 AA cells (not included)
Scope of delivery: 1x vehicle ATC3.4 ready mounted RTR 1x 2,4GHz remote control Manual
Required accessories: Driving battery Charger 4x Mignon cells AA for remote control
This product is manufactured by: Absima GmbH Gibitzenhofstr. 127A 90443 Nürnberg Deutschland www.absima.com
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Antrieb | drive |
Ausführung | contents |
Besondere Features | Brushless |
Hersteller | Absima |
Maßstab | scale |
Modelltyp | modeltype |
Motorart | engine type |
Charger Cube 2.0 LiPo / NiMh 5A 50W
NiMH battery 7.2V 3000mAh stick pack Tamiya Deans
NiMH battery 7,2V 5100mAh driving battery Tamiya Deans/Tamiya
LiPo Stick Pack 7.4V-45C 4000 Hardcase (T-Plug)
Email me when available again
LiPo Stick Pack 7.4V-45C 5000 Hardcase (T-Plug)
Lipo battery 7.4 Volt 5200mAh 45C 2S - Hardcase - T-connector
Charging cable T-plug (Deans), 400mm silicone cable flat
Power Plus 80 Charger AC/DC 80 Watt 1-6S 7A
Expert LD 80 Multifunction Charger 80W LiPo 1-6S 7A
Alkaline 1.5V, AA Mignon cells (4 pieces) battery set
LiPo Battery 2S 4000mAh 7.4V 45C Stick Pack with T-Connector
Email me when available again
Stick Pack NiMH 7.2V, 3600mAh, T connector and Tamiya connector
NiMH battery 4000mAh 7.2V Stick Pack T-plug & Tamiya
Charger e3 LiPo 2-3S 1.2A