Racing Fighter 1:10 RC Buggy Brushless Edition Complete Set
218.95 €
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 37.42 € | (8.90%) |
12 Monate | = | 19.11 € | (8.90%) |
24 Monate | = | 9.96 € | (8.90%) |
36 Monate | = | 6.92 € | (8.90%) |
48 Monate | = | 5.41 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Racing Fighter 1:10 RC Buggy DT-03 Brushless Edition Complete Set + Ball Bearings
Now in the power package with brushless combo! Due to the brushless drive, the vehicle has significantly more power and a longer driving time. Besides, a brushless motor has a higher efficiency and is even Lipo-capable! In addition, all the accessories needed for operation, so transmitter & receiver, lipo battery, lipo charger and steering servo!
The Real Fighter!
TAMIYA presents the Racing Fighter Buggy, the facelift of the Neo Fighter Buggy. This new entry-level racer offers optimal conditions for driving fun in any terrain. The model is particularly convincing in terms of quality and robustness, it is also the standard model for the TAMIYA FIGHTER CUP, the world's largest RC youth racing series.
The Racing Fighter Buggy presents itself in a new look with black rims and a body in desert buggy look.
Weighing just over 1 kg, the 1/10th scale Racing Fighter Buggy is a good 40 cm long and, thanks to its large wheelbase, offers even more directional stability when going fast. Its narrow, almost tubular DT-03 chassis contains well-protected electronics and mechanics. Independent suspension, differential, oil pressure shock absorbers and the flexible polycarbonate body, which contains design elements of classic models, are standard.
Technical details:
- impact-resistant DT-03 tub frame chassis
- Front bumper
- Double wishbones
- Independent front and rear suspension
- Oil pressure shock absorbers
- 2WD rear drive
- Differential gear
- Polycarbonate body
- Pin spike tires rear
- Grooved front tires
Technical data (controller) Constant current: 45 A Peak current: 260 A Input voltage: 6-10 NiMH, 2-3S LiPo BEC output: 2 A @ 6 V (2S LiPo), 1 A @ 6 V (3S LiPo) BEC type: Switching BEC Dimensions: 34 x 29 x 31 mm Weight: 54 g Plug connection: T-Plug
Technical data (motor) Specific speed: 3,000 rpm/V (KV) Diameter motor: 36 mm Length motor: 50 mm Shaft diameter: 3.175 mm
Required accessories: Paint for Lexan body (TAMIYA PS-)
Scope of delivery: 1x kit 1x Brushless-Combo 3000KV 1x car specific ball bearing set 1x Lipo fast charger with automatic switch off 1x Lipo battery 2s 4000mAh 1x steering servo 3 KG 1x 2-channel remote control
Attention: Since original motor and controller are removed from the kit, the kit is no longer provided with shrink wrap!
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Antrieb | Heckantrieb - 2WD |
Ausführung | Set mit Fernsteuerung |
Besondere Features | Brushless |
Besondere Features | mit Akku und Lader |
Hersteller | Tamiya |
Maßstab | scale |
Modelltyp | Buggy |
Motorart | engine type |
In this article group are 99 article, filter the result:
You want to search for something specific?
You want to search for something specific?
Hi-Torque Servo Saver black universal
DT-03 DF-02 DT-02 TT-02B CVA Oil Damper Set Short (2+2)
Neo Fighter body with spoiler, Lexan DT-03
Tuning universal joint 2 pieces DF-02 DF-03 TT-02B
DT-03/02/DF-03 P-Parts Servo Saver
Ball bearing set Super Fighter, Neo Fighter DT-02/DT-03
RIM ADAPTER (4) WITH AXLE
DT03 C-parts chassis / shock towers
Frontbumper / Rammer for 1/10 Tamiya Neo Fighter DT03
Email me when available again
DT-03 Damper bridge front carbon verst.
12mm alloy wheel driver 6mm wide with fuse
Email me when available again
DT-03T Aqroshot body w.spoiler
Wheel spacer blue Wheel Spacer Set
Email me when available again
Motor pinion steel, 17 teeth, module 0.8
Spacers set 4mm shims 30 pieces 0.1 0.2 0.3mm
DT03 Alu servo saver lever P3 (1)
Alu nut 4mm ribbed blue
Threaded rods set left/right adjustable for DT-03 (6)
Shock absorber set short CVA-Mini II - DT-02 80-94mm
Tie rod set adjustable (toe + camber) DT-02
Spacers set 10mm shims 30 pieces 0,1 0,2 0,3mm
DT-03 Stabilizer set front/rear (2+2)
O-rings red
Rearbumper / rear bumper for 1/10 Tamiya Neo Fighter DT03
Email me when available again
Shock absorber spring set - DT-02
N-Parts drive shafts with wheel axles DT-03 TT-02B
Spacers set 3mm shims 30 pieces 0.1 0.2 0.3mm
DT03 Alu rim driver front (2) mitla.
Email me when available again
Body Racing Fighter, unpainted
Sticker sheet / decal sheet for Neo Fighter Buggy DT-03
Hi-Torque Servo Saver
Aluminum engine heat sink - DT-02 DT-03
Gear bag - DT-02
TT-01/DT-02 3x22 wishbone shafts Low friction
Shock absorber set for CVA-Mini II - DT-02 55-70mm
Shaft 2x10mm wheel driver (10)
Servo saver parts Servo saver complete set
X-Parts Damper Eye Spring Plate Clips
Email me when available again
A parts - DT-02
F-104 Alu Servo Saver Horn HT
Ball cups 5mm for 3mm thread long reinforced 8pcs
DT-03 aluminum steering servo mount
DT-03 rear shock absorber bridge carbon verst.
Aluminum shock absorber rear 90mm blue for DT-03
AXLE ANGLE RIGHT
E-TEILE TL01 Body holder
B parts - DT-02
Aluminum spacers 0.75 mm blue (8)
SECURING CLIP 7MM (10) Body spline
Ball bearing set for buggy DT-02 / DT-03, 14 pieces
Customers who bought this item also bought
PS-62 Pure Orange (ENEOS) Polycarbonate 100ml
PS-5 Black Polycarbonate 100ml