Team Corally C-00176-R MURACO XP 6S 2023 4WD Truggy LWB 1:8 Brushless 6S RTR V2 +100km/h R version with installed tuning parts
429.95 €
619.00 € UVP*
Not available at this time Notify me when available










Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 73.48 € | (8.90%) |
12 Monate | = | 37.53 € | (8.90%) |
24 Monate | = | 19.56 € | (8.90%) |
36 Monate | = | 13.59 € | (8.90%) |
48 Monate | = | 10.62 € | (8.90%) |

Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
MURACO XP 6S V2022 4WD Truggy LWB 1:8 Brushless 6S RTR
Few vehicles can match a 1/8th scale truggy for incredible top speeds and the ability to handle virtually any type of track, surface or terrain like Team Corally Muraco XP 4WD 1/8th Scale Brushless Truggy RTR. Based on the popular Shogun, the Muraco features a distinctive new body and graphics package that will stand out on tracks, skate parks or bash spots. With massive 6S LiPo power and a 2050KV brushless motor, the Muraco XP is capable of easily dominating smaller models. With its aggressive appearance, racing-inspired design and comfortable suspension, the Muraco XP masters even the most complex stunts and challenging terrains and keeps coming back for more.
The robust all-metal four-wheel drive, independent suspension, racing chassis, pulling power and aerodynamic racing body design make the Muraco XP the ultimate electric 1/8 monster truggy for drivers looking for unmatched bashing performance.
Ride all year round, anytime, anywhere The Team Corally Muraco XP truggy features a full suite of waterproof electronics, so it's ready for driving in almost any conditions. Not only is the ESC resistant to splashing water and mud, but the steering servo and receiver are also protected from the elements by special waterproof circuit board coatings. The receiver is also protected against dust, mud and moisture by a sealed housing. Of course, aerospace-grade rubber-sealed ball bearings are standard on the Muraco XP, so you can drive virtually anywhere and in almost any conditions. (Please note: No RC vehicle should be driven or submerged in water or mud. Be careful when driving in extreme conditions. Proper maintenance such as cleaning and lubrication should be performed after driving in mud, water or near salt water).
Racing chassis for extreme performance nspired by top-tier professional racing machines in the RC industry, the Muraco XP uses a pan-style aluminum chassis for the most efficient and durable chassis layout. With optimized forward weight distribution, the heaviest drive components and other systems are kept as close to the front as possible. Robust, triangular chassis braces front and rear provide additional rigidity, allowing the aluminum big bore shocks and HiCC8 composite suspension parts to operate without the negative effects of chassis plate flex. The reinforced composite chassis side panels feature integrated front bumpers that provide additional protection for the polycarbonate bodywork and electronics. Team Corally's exclusive SPL system secures the shock absorber spring plates and prevents the springs from shifting during extreme compression and rebound, while the innovative RSP Sway Bar system keeps the Muraco firmly under control in corners and ensures consistent handling on all surfaces.
Massive 2050KV brushless power With the Team Corally Kuron 2050KV 4-pole motor mounted on a torsionally stiff 2-piece aluminum sway bar, you can be sure to reach maximum speeds for big air stunts! The motor is equipped with a hardened steel pinion gear that works in conjunction with a hardened steel spur gear on the center differential. Want to reach remarkable top speeds with a pull of the trigger? Speeds of over 110 km/h are no problem - just install the right battery!
LiPo Power Ready The Muraco's battery holder can accommodate batteries of all common sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can be powered by 4S-6S LiPo batteries to optimize performance on any surface and in any conditions!
Durable steel drive system with three fluid-filled differentials As is usually only found on premium competition-level RC vehicles, the Muraco is equipped with front, center and rear silicone fluid-filled and sealed limited slip differentials that ensure the full power of the 2050KV Kuron motor reaches the ground. The differentials are easy to remove and service, and you can even modify each differential to fine tune the traction at both ends of the truggy! Inside you'll find a complete set of metal gears and outer sprockets connected to steel center driveshafts. The front end is driven by CVD drive shafts, while the rear end is driven by robust metal dogbones. The entire drivetrain is supported by 8x16x5mm aerospace grade rubber sealed ball bearings for maximum efficiency and durability.
Premium alloy/steel center differential The Muraco XP center diff features an aluminum alloy housing and durable steel spur gear for unmatched performance and reliability. The metal housing allows for optimal alignment of the internal gear assembly by improving heat dissipation and reducing fluid loss, while the steel spur gear ensures maximum power output and resistance to damage from dirt or debris.
Adjustable battery holder The innovative battery mount allows the Muraco XP to comfortably fit most 4S-6S LiPos manufactured for overland vehicles to protect your battery investment while ensuring optimal weight distribution.
Optimized racing suspension The Muraco XP features a robust pivot-ball front suspension with steel pivots and steering tie rods as well as robust composite struts. The rear suspension features composite outer hubs and one-piece composite upper links. At each corner, tough HiCC8 composite control arms and adjustable large diameter 16mm oil-filled shock absorbers provide a soft, compliant ride.
Innovative all-terrain tires The solid, grippy rubber tires are fitted with foam inserts and mounted on super-robust multi-spoke wheels with 17 mm hexagonal hubs. The "big-block" multi-surface tread pattern with strong sidewalls minimizes inflation and provides maximum control at any speed and on any surface.
Varioprop S2R steering wheel control The Muraco is fully controlled via the ergonomically designed radio transmitter with pistol grip, which is equipped with the latest 2.4 GHz technology and enables interference-free control at a distance of 300 m. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip enables perfect control of the accelerator pedal, with forward and reverse control combined in a single control element. Learning to control the Muraco is quick and easy with the S2R controller!
The Muraco XP RTR is an exciting, impressive all-terrain machine! If you're looking for an assault on smaller cars, with speed and bounce that other cars simply can't match, then look no further than the Muraco XP RTR from Team Corally.
Features:
- 100+ km/h (60+ mph) possible
- Factory-built, competition-ready 1/8 scale truggy with built-in electronics, body and tires
- Team Corally TOROX 185 ESC 4-6S with LiPo low-voltage protection (programmable)
- Team Corally Kuron 2050kV 4-pole brushless motor (4-6S operation)
- Varioprop CRHV-7225 high-torque, high-voltage digital servo with metal gears and 25 kg torque
- Ergonomic Varioprop S2R transmitter with interference-free 2.4GHz technology
- Aluminum servo arm for precision and strength
- 3mm 7075 aluminum steering Ackermann plate
- Separate splash-proof and dust-proof electronics box with transponder holder
- Adjustable battery holder for all common LiPo batteries
- Complete set of rubber-sealed ball bearings in aerospace quality
- Oversized 8 x 16 x 5mm gear ball bearings
- Hardened steel spur gear and motor pinion
- Three sealed metal differentials, individually filled with silicone fluid
- Central differential made of aluminum/steel
- Quick and easy access to the differential
- 2-piece aluminum motor mount with composite gearbox cover
- 52T steel spur gear
- Fully hard-coated metal drivetrain
- Extra surface hardened steel CVD front joints
- Aluminum 17 mm drive hex
- Oil-filled 16mm threaded aluminum big bore shocks
- Exclusive system for locking the shock absorbers
- CNC aluminum shock towers, 5 mm rear / 4 mm front
- Aluminum upper arm stiffening plate at the front
- Independent front suspension with pivot ball
- Independent rear suspension with double wishbones
- Optimized, custom-made composite parts
- Heavy-duty one-piece composite material
- suspension links and track rods
- Aluminum suspension mounts with composite cover
- Team Corally RSP front and rear stabilizer bar
- Aluminum chassis plate
- Heavy duty chassis struts front and rear
- Reinforced chassis side guards with integrated body protection
- Front bumper with additional shock-absorbing chassis protection
- Reinforced high downforce wing and wing bracket
- Factory-fitted high-speed low-profile tires on black 7-spoke composite wheels
- Durable and attractive body made of printed polycarbonate
- Many optional tuning parts available for individual customization
Technical data: Scale: 1/8 Drive: 4WD all-wheel drive Length: 570 mm Height: 190 mm Wheelbase: 384 mm Track width front: 405 mm Track width rear: 405 mm Ground clearance: 67 mm Weight: 4350 g (without battery) Battery compartment: 161x51 mm Tire diameter: 140 mm Tire width: 60 mm Motor: Kuron 825 - 2050KV Brushless 4-6S (includedI Remote control: 2.4Ghz (included) Servo: CR-7225 - 25Kg (included) ESC: TC - Torox 185 Brushless 2-6S (included) Driver: 17mm Gearing: Module 1 Main gear: 52T Motor pinion: 13T
Scope of delivery:
- 1x fully assembled vehicle incl. electronics
- 1x ready-painted body
- 1x 2.4GHz remote control
- instruction manual
Required accessories: 4S or 6S LiPo battery with XT90 connection charger
This product is manufactured by: Pro Models JSP Group Intl bv Geelseweg 80 2250 Olen Belgium [email protected]
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Antrieb | drive |
Ausführung | contents |
Besondere Features | Brushless |
Hersteller | Team Corally |
Maßstab | 1:8 |
Modelltyp | Truggy |
Motorart | engine type |
G-Tech LiPo Battery 22.2V 4500mAh 60C 6S1P Hardcase, XT90
Email me when available again
Bashing 5000mAh 11.1V 3S1P 60C Lipo Battery XT90 Connector
Bashing 5000mAh 14.8V 4S1P 60C Lipo Battery XT90 Connector
LiPo battery 6750mAh 14.8V 60C 4S1P, HardCase, XT90 Plug
BOOST LiPo Battery 3S 6000mAh 50C 11.1V Softcase XT90
Screwdriver mat 'Modellbau Berlinski' Pitmat 590x395mm
Charging cable XT90 incl. XH Balancer Board 2-6S
Balance Board 2-6S XH with XT-60 to XT-90 charging cable
Cube 80 Duo Charger AC/DC 2x 80 Watt Lipo up to 6S
Power Plus 80 Charger AC/DC 80 Watt 1-6S 7A
Charging Cable - 4mm Bullet to XT90 Plug - 300mm - Gold
Expert LD 80 Multifunction Charger 80W LiPo 1-6S 7A
D260 AC/DC Duo Charger LiPo 1-6S / 1-15 Z NiMH 14A 260W
LiPo battery 11.1V/4500mAh 60C, with XT90 Kronos
Battery Set Mignon/AA 1,5V (4)
Email me when available again
In this article group are 153 article, filter the result:
You want to search for something specific?
You want to search for something specific?
Steel differential planetary gear for 1/8 Kronos
Chassis Brace Kit Xtreme for all 1:8 Corally Monster Trucks
Ball head bracket set for steering 1/8
Shock absorber springs front (medium) for 1/8 Shogun (2)
Aluminum servo horn (red) for 1/8 Dementor
Aluminum motor mount for 1/8
Body clips 1/8 with fuse (6)
Aluminum wheel nuts red for 1/8 Dementor (4)
Rear wing black for 1/8 Dementor
Steel shim washers 6x11,5x0.2mm for 1/8 Shogun (10)
Aluminum shock absorber 'medium' 1:8 mounted with 600Cps oil
Aluminum bracket for suspension front for 1/8 Kronos
Plastic bumper front + rear for 1/8
Steel differential bevel gear 43T for 1/8 Shogun
Aluminum damper cap bottom (2)
Wishbone bracket front for 1/8 Kronos
Silicone diaphragm for shock absorber 1/8 Shogun (4)
Clips set 1-4.5mm for 1/8
Steel rear drive bone (long) for 1/8 Kronos (2)
Piston plate different versions 1/8 Dementor
Email me when available again
Aluminum bracket suspension rear for 1/8 Dementor
Center Roll Cage Bracket for 1/8 Shogun
Steel Pivot Ball for 1/8 Shogun (4)
Steel bushings for steering 1/8 Dementor (2)
Steel suspension bolt for shock absorber 1/8 Dementor
Aluminum chassis long 1/8 Truggy XP
Front body mount for 1/8 Dementor (2)
Steel pin with O-ring for 1/8 Dementor (2)
Aluminum wheel driver 17mm red for 1/8 Python (2)
HD damper piston plates 4mm
Chassis strut front for 1/8 Shogun
Email me when available again
Ball cups for stabilizer 1/8 Kronos (4)
Aluminum shock absorber adjusting nut red for 1/8 Dementor
Steel pin for differential gear for 1/8 Shogun
Differential seal for 1/8 Dementor (4)
Kronos XP 6S wishbone V2 front bottom
Steel post for Servo Saver 1/8 Dementor
Steel Turnbuckles M3 - 35mm for 1/8 Kronos (2)
Silicone O-Ring 4x8mm for 1/8 Dementor (5)
Battery compartment large with holder for controller Dementor XP 6S 2021
Email me when available again
Spacers set suspension for 1/8 Dementor
Stabilizer front 2.4mm for 1/8 Dementor
Reinforced rear body mount V2 for 1/8, 2 pieces
Aluminum damper cap black anodized for 1/8 Dementor (2)
Aluminum shock absorber housing front for 1/8 Kronos
Steel threaded rod M4 92mm (2)
Wishbone bracket FF 7075 T6 - 3mm Hard Anodized Black
Email me when available again
Steel bevel gear 13T for 1/8
Aluminum rear damper housing for 1/8 Kronos
Aluminum Xtreme diff housing (center diff) 35mm black
Please send me an email as soon as the item is available