Mini-T 2.0 2WD Stadium Truck 1:18 Brushless 2.4GHz RTR, red
229.95 €
259.99 € UVP*
Not available at this time Notify me when available
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 39.30 € | (8.90%) |
12 Monate | = | 20.07 € | (8.90%) |
24 Monate | = | 10.46 € | (8.90%) |
36 Monate | = | 7.27 € | (8.90%) |
48 Monate | = | 5.68 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Mini-T 2.0 2WD Stadium Truck 1:18 Brushless 2.4GHz 100% RTR, red
The Losi Mini-T 2.0 1:18 Brushless 2WD Truck has been reinvented with modern technology and Team Losi Racing experience. It pays homage to the original Mini-T with features and options you wouldn't have dreamed of back then. It may be small, but the powerful 2-in-1 brushless motor/controller combination is more reminiscent of the performance of a 1/10th scale car. The Mini-T's suspension geometry is based on the high-end TLR 22 racing platform, plus the Dynamite 7.4V 2S 800mAh 50C Li-Po battery provides plenty of power, and the 2.4Ghz remote control keeps you in control at all times. A mid-motor configuration for better balance, knobby rear and grooved front tires, and a wide range of tuning parts round out the ready-to-run package. TLR technology and performance in a 1:18 package that you can take virtually anywhere.
Scaled-down version of the 1/10th scale TLR 22T. In 2003, Team Losi introduced the incredibly successful Mini-T based on the XXXT platform. Today, the new Mini-T 2.0 Brushless is based on the TLR 22T platform and benefits from all the experience we have gained over the years to make this generation of Mini 2WD trucks absolutely unbeatable.
Mid-engine configuration The Mini-T 2.0 is already equipped with a mid-mounted engine from the factory. Like its 1/10th scale counterpart, this allows for a balanced chassis and therefore better performance on different surfaces as well as optimized traction and steering.
Brushless motor/controller 2-in-1 combination. The Dynamite 6000Kv brushless motor system gives you almost unlimited torque for wheelies without end and RPMs for absolute top speed. The 2-in-1 controller makes the Mini-T 2.0 Brushless super tidy inside by eliminating cables.
Aluminum chassis The Mini-T 2.0 Brushless was designed with a 1.5mm thick 6061-T6 aluminum chassis plate. This chassis offers you more ruggedness and durability while significantly improving performance.
Injection Molded Shock Absorbers The injection molded shocks have threads for easy adjustment of spring preload and ground clearance. In addition, they feature bottom-loaded, easy-to-maintain shock cartridges with two O-rings to keep the oil where it should be.
Ready to Run The Mini-T 2.0 Brushless is completely pre-assembled and ready to go. Simply insert the included AAA batteries into the remote control and charge the included drive battery with the included charger.
Dynamite Reaction 2.0 2S 800mAh 50C LiPo Battery The Mini-T 2.0 Brushless comes with a 2S 650mAh LiPo battery for excellent performance and runtime.
USB Charger When we say ready-to-run, we mean it. The Mini-T 2.0 brushless comes with a USB charger for easy and convenient charging.
Remote control and receiver with 2.4GHz With features like throttle and steering reversal as well as throttle and steering travel limiting, this 2.4GHz remote control gives you a lot of features in a small package and all with a glitch-free connection.
Grooved front, knobby rear To tame the immense power of the Dynamite 6000Kv brushless motor, we gave the Mini-T 2.0 a knobby tread pattern on the rear tires. This works in perfect harmony with the grooved tread pattern on the front tires for excellent steering response.
Completely ball bearing mounted* The Mini-T 2.0 Brushless is fully ball bearing mounted which not only increases the performance of the truck by reducing friction in the drivetrain, but also provides longer run times. *exterior bellcrank steering
Servo Saver The Mini-T 2.0 brushless comes with an oversized three-core Spektrum metal gear servo. A servo saver provides additional protection
TLR 22T suspension geometry The Mini-T 2.0 brushless suspension geometry is taken from the TLR 22T platform, giving you the balanced steering and traction of its race-optimized predecessor.
Tuning Options We offer a wide range of tuning parts for the Mini-T Brushless from aluminum upgrades to brushless motors and many more.
Features:
- Scaled down version of the 1/10th scale 22T.
- Brushless 2-in-1 motor/controller combination
- Dynamite 7.4V 2S 800mAh 50C Li-Po battery pack
- Waterproof electronics
- 22 suspension geometry
- Mid-motor configuration
- Pre-assembled and Ready-To-Run
- 2.4Ghz remote control
- Completely ball bearing mounted (except steering)
- Servo Saver
- Tuning parts available
technical data: Scale: 1/18 Drive: 2WD length: 232mm Width: 179mm Height: 91mm Wheelbase: 160mm Ground clearance: 24mm Main gear: 60T Pinion: 15T Gearing: Modlu 0,5
Scope of delivery: 1x Losi 1/18 Mini-T 2.0 RTR Truck in red 1x Horizon 2.4Ghz Receiver WP 3-CH 1x Dynamite BL Motor/ESC 2-in-1 6000Kv 1x Spektrum SX107 Micro Metal Gear Servo 1x Dynamite 7.4V 800mAh 2S 50C LiPo Hardcase: EC2 1x Dynamite USB 2S LiPo Charger 4x AAA Batteries 1x Horizon 3-CH 2.4Ghz Transmitter
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Antrieb | Heckantrieb - 2WD |
Ausführung | Ready to Run - RTR |
Besondere Features | mit Akku und Lader |
Besondere Features | Brushless |
Besondere Features | Wasserdicht |
Hersteller | Losi |
Maßstab | 1:18 |
Modelltyp | Truggy |
Motorart | engine type |
Please send me an email as soon as the item is available