Hotshot II Blockhead Motors 1:10 4WD kit with controller
179.90 €
270.00 € UVP*
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 30.74 € | (8.90%) |
12 Monate | = | 15.71 € | (8.90%) |
24 Monate | = | 8.19 € | (8.90%) |
36 Monate | = | 5.68 € | (8.90%) |
48 Monate | = | 4.44 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
The reissue of the Hotshot II (58062) released in 1987 comes in this version in "BLOCKHEAD MOTORS" design! The Hotshot II was one of the first 4WD buggies from TAMIYA and has not been reissued until now. This model is, after the 58695 Wild One, the second version from the Japanese designer Jun Watanabe from the "BLOCKHEAD MOTORS" forge. The model is based on the 58062 model with some changes: New decals and an adapted design to the buggies of the 80s.
The body is made of polycarbonate and is already cut out and pre-painted in a Brilliant Blue. The kit still needs to be assembled and a powerful 540 electric motor is included. The CVA II oil shocks are installed as in the original model: One transverse shock on the front axle and 2 upright shocks on the rear axle. The drive is via a 4WD cardan drive and the wheels have independent suspension.
Technical data:
- 1/10 scale kit model
- Length: 390mm, width: 235mm, height: 150mm,
- Hotshot II polycarbonate body (0,7mm), cut out and pre-painted in Brilliant Blue
- New, higher roll cage for a more realistic appearance of the driver figure (upper chassis has been adjusted as well)
- Axle carriers and rims are matt chrome plated
- New decal sheet from Jun Watanabe's design brand "BLOCKHEAD MOTORS" included
- Race license plates, headlights, side plates, window nets and a dummy antenna are also included
- Independent suspension on all four wheels with one front shock absorber and 2 rear shock absorbers (CVA II oil dampers)
Scope of delivery:
- Kit model with detailed illustrated assembly instructions.
- Electronic speed controller
- 540cc electric motor
- pre-painted polycarbonate body
Required accessories: remote control with receiver, steering servo, battery pack, charger
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Antrieb | drive |
Ausführung | Bausatz - Kit |
Hersteller | Tamiya |
Maßstab | scale |
Modelltyp | Buggy |
Motorart | engine type |
3 - channel display remote control 'CR3P' 2,4 GHz incl. R3WP
Battery charging cable with plug for TAMIYA
D-Power CD-5000 7.2V NiMH battery with Tamiya connector
Email me when available again
Power Plus 80 Charger AC/DC 80 Watt 1-6S 7A
Tool set hexagon socket, cross, slot, socket wrench
Expert LD 80 Multifunction Charger 80W LiPo 1-6S 7A
Electric Starter Kit Peaklader, Stickpack 3000mah Batteries
NiMH 7.2V, 3000mAh, Stick Pack
NiMH battery 7.2V, 4000mAh, stick pack with Tamiya connector
FS Reflex X1 2-channel remote control 2.4Ghz set
CS-3 Standard Servo 3KG/JR
Battery Set Mignon/AA 1,5V (4)
Customers who bought this item also bought
RC Reflex Pro 3 Electric Set
Servo CS-6 Waterproof MG/ 6kg 25Z JR Connector
VW Golf Mk2 Gti 16V Rally MF-01X kit 1:10 with controller
Primer spray (fine) white 180ml