FMS FMS11831RTRBU FCX18 Toyota LC80 4WD Crawler 1:18 blue 2.4GHz RTR

FCX18 Toyota LC80 4WD Crawler 1:18 blue 2.4GHz RTR

The FCX18 Toyota LC80 is an officially licensed crawler on a scale of 1:18. The scaler comes with a 2-speed gearbox, built-in electronics, integrated lighting, remote control and battery ready to drive out of the box.

100% Scale The model is officially licensed by the Toyota Motor Corporation. From the straight body line, the roof rack, the front and rear bumpers, the functional spare wheel to the steerable blinker group and the simulated bevel gear drive axles - every detail of this scaler is just right.

Masters any terrain To faithfully reproduce the off-road capability and handling of the original vehicle, FMS has made remarkable progress by deriving the FCX18 chassis from the FCX24 series chassis. The FCX18 chassis features a metal beam construction as well as metal beams (4 pieces) and steering rods (2 pieces) that are capable of performing under extreme conditions. The mid-mounted drive unit has a low center of gravity and includes a 2-speed gearbox, a transfer case and a 180cc brushed motor. Power is transmitted to the front and rear axles via the cardan shaft. The axles are fitted with wheel side reducers, commonly referred to as "portal axles", which increase the ground clearance of the differential gear group and improve driveability.

The FCX18 is fitted with a straight axle as standard, but the planetary differential can also be replaced with high viscosity silicone oil to simulate the drive effect of an LSD limited slip differential. After installing the differential, the ultimate climbing ability is reduced, but a smaller turning radius and more stable handling at high speeds are achieved.

2-speed gearbox The two-speed gearbox can be shifted via the 3rd channel of the remote control and is operated via a 9g servo. The low reduction ratio is 99 and the torque is very high and suitable for extreme gradients. The high reduction ratio is 24.75, allowing relatively high speeds to be achieved.

Built-in electronics The waterproof electronics consist of a powerful brushed motor, two independent servos, a 3-in-1 receiver/controller/light control unit and a 2S (7.4V) 900mAh LiPo battery. The complete electronics are already integrated and connected in the model, so that the Land Cruiser can be launched immediately after unpacking.

Features:

• 1:18 scale scaler with 4WD drive
• Officially licensed by Toyota
• 2-speed gearbox switchable via remote control
• Portal axles with metal gears
• Low metal rods (4 pcs.) and steering rods (2 pcs.)
• Four-link suspension
• Rigid metal beam
• Completely mounted on ball bearings (24 pcs.)
• Functional spare tire
• Steering servo with metal gearbox
• Coil springs and oil pressure shock absorbers
• 3-in-1 receiver with 20A controller and light control
• Integrated lighting system with headlights, rear lights and roof lights - 5 modes switchable via remote control
• Hinged hood
• Painted body
• High-traction tires
• Front and rear bumpers & roof rack
• Optional conversion parts such as metal differential, metal PTO, metal gears, brass wheel counterweights and trailer available separately
• Waterproof electronics
• 2.4 GHz remote control included
• Including 7.4V 900mAh LiPo battery for up to 30 minutes of driving time
• USB charger for the battery included

Technical data Scale: 1/18 Length: 282 mm Width: 126 mm Height: 136 mm Wheelbase: 160 mm Ground clearance: 35 mm Weight: 535 g Tires: Ø 56mm, T 19.2mm Motor: Brushed 180 Receiver/controller/light unit: 20A 2.4GHz remote control Speed: max 5 km/h Driving time per battery: approx. 30 minutes

Scope of delivery: 1x fully assembled vehicle incl. electronics 1x 2.4GHz remote control 1x rechargeable battery 1x USB charger Instruction manual