SkyRC SK500037-01 Infrared thermometer ITP380
41.65 €
48.90 € UVP*










The compact SkyRC ITP380 infrared thermometer is used for safe and contactless measurement of the temperature of special surfaces such as motors, chargers or entire vehicles. Compared to its predecessor, SkyRC relies on a classic TO-46 thermopile sensor here. The sensor element, consisting of 116 elements of small thermocouples with an active area of 545 µm in diameter on a silicon chip, absorbs the energy and thus generates the output signal. Depending on the surface, however, the measured value can deviate despite the same temperature. For this purpose, the thermometer can be tuned to precisely these different surfaces to display a more accurate result.
Surface/emission coefficient Anodized aluminum 0.77 Plastic 0.91 Rubber, hard high gloss plates 0.94 Carbonaceous surfaces 0.98
Features:
- Wide measuring range -40°C (-40°F) up to 380°C (716°F).
- High precision and fast infrared sensor
- Four measurement modes: Quick Mode / Scan Mode / Max. Value / Min. Value
- Measurement unit in Celsius or Fahrenheit
- Emissivity coefficient can be adjusted
- Large LCD display can show temperature, emissivity coefficient and battery capacity
- With backlight to read the values more easily
- The meter has low power consumption
- Auto power off after 1 minute to increase battery life
Application: There are 4 measurement methods. First, point the sensor at the top of the meter directly at the object to be measured and perform one of the following actions:
1. Quick Mode: press the "MEASURE" button once to measure the current temperature and show it on the display. Scan Mode: Move the aluminum cap as close as possible to the object. Press and hold the "MEASURE" button to measure the temperature continuously. The display will keep showing the temperature updated. After releasing the "MEASURE" button, the last measured temperature will be displayed. 3. maximum temperature mode: point the aluminum cap at the object to be measured, press the "Mode" button once and hold the "MEASURE" button. The thermometer will display the hottest or maximum temperature that was measured. Minimum Temperature Mode: Point the aluminum cap at the object to be measured, press the "Mode" button twice and hold down the "MEASURE" button. The thermometer will display the coolest or minimum temperature that was measured.
Technical data: Operating voltage: 2x AAA battery (sold separately). Operating current: up to 40mA at 3V Operating temperature: 0-50°C Power consumption: up to 25ua at 3V Adjustment range of infrared radiation coefficient frequency: 0.01-1 Accuracy: -40°C - 0°C (+/- 1.5°C). 0°C - 380°C (+/- 1.5°C) -40°F - 32°F (+/- 3°F) 32°F - 716°F (+/- 3°F) Weight: 75g Dimensions: 121 x 40 x 39.6mm
Scope of delivery: 1x Infrared Thermometer ITP380
This product is manufactured by: SkyRC Technology Co.,Ltd. Floors 4,5,8, Building 4, Meitai Industrial Park Guanguang Road, Guanlan, Longhua District, Shenzhen China, 518110 [email protected]
Responsible in the EU is: Robitronic Electronic GesmbH Pfarrgasse 50 1230 Wien Österreich [email protected]
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | SkyRC |
Customers who bought this item also bought
Swing pin rear inner 3x56.3mm (2 pcs) Pulse
Gear shaft Heavy-Duty 5 x 29mm (silver) Savage XS
Diff shaft Heavy-Duty 5 x 23.5mm (silver) Savage XS
Email me when available again
Swing pin front inner 3 x 51.8mm (2 pcs) Bullet
Swingarm set front WR8
Email me when available again
Mezzo 1:10 Tires front 4WD, yellow, 1 pair