Submarine Type VII 1:60 Basic Construction Kit
174.82 €
Not available at this time Notify me when available
Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 29.88 € | (8.90%) |
12 Monate | = | 15.26 € | (8.90%) |
24 Monate | = | 7.95 € | (8.90%) |
36 Monate | = | 5.52 € | (8.90%) |
48 Monate | = | 4.32 € | (8.90%) |
Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
Submarine type VII base kit
The Type VII was probably the most famous submarine in the world, as over 1000 were built in various versions. This type is characterized by its particularly harmonious lines, which resemble even more a ship than those of more modern submarines. This model of the submarine type VII b is in its basic configuration a construction kit with all thermoformed parts made of high quality ABS plastic, which are needed to build a pure floor model. If you want to make the model drivable and submersible, you will need the propulsion and diving kit. However, larger depth rudders must be used than those of the scale model. A subsequent conversion from a floor model to a submersible model is not possible.
The hull of the Type VII b submarine consists of two ABS half-shells, the diving tank, ballast tank as well as the deck, which is deep-drawn from thin material so that all slits and openings are clearly visible. The turret superstructure is also assembled from several thermoformed ABS parts. All hardware parts as well as the two guns are included in the basic kit.
The technology: The diving method of this model is semi-dynamic, which means that a pump and a flood tank are included in the diving kit, but only supportive to the dynamic (supported by speed) diving.
In addition, for the expansion as a functional model is still needed: Drive and diving set Two NiMH batteries 6 V min. 2000 mAh (connected in series) Remote control min. 4 channels with power supply for the transmitter Receiver min. 4 channels, electronic speed controller 12 V min. 20 A for the drive, electronic switch for the pump of the flood tank One servo each for the depth and rudder functions Cables and connectors for wiring Adhesives, paints
Technical data: Scale: 1:60 length: 1120 mm width: 125 mm Height: 170 mm
Construction: Material hull: ABS Material superstructure: ABS Hull construction: ABS thermoformed
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Krick |
Submarine propulsion and diving set
Servo standard uni connection
QuicRun 0880 Dual Brushed Regulator 80A for 1:10 6-14,4V
Please send me an email as soon as the item is available