Modell Tec 24530 Sidewheel steamer Skibladner 1:60 Kit

Sidewheel steamer Skibladner 1:60 Kit

The D/S Skibladner is the oldest steamship in regular service. It was built in 1856 and still regularly sails its ferry route on Lake Mjøsa in Norway. The Skibladner is also Norway's only paddlewheel-driven ship. It is still in operation today and has been in regular service since its maiden voyage on August 2, 1856. Its route calls at towns on both shores of Lake Mjøsa and runs from Eidsvold to Lillehammer. Its home port is Gjøvik.

The ship is 50.1 meters long. The hull has exceptionally slender lines with a width of only 5.06 m + the paddle wheels on each side. This gives a top speed of 14 knots. The propulsion system has an output of 606 hp. The ship was built in a collaboration between Motala Shipyard and Aker Mek. The Skiblander is maintained by Oplandske Dampskipselskap, which still owns and operates the ship.

The kit of laser-cut wooden parts comes with fittings kit and lighting. For the expansion as a remote controlled driving model, a corresponding expansion kit with motor and worm gear, servo for the rudder linkage and small parts is available as an accessory.

The typical narrow hull design of these paddle steamers naturally presents some difficulties when building as a model and especially as an RC model. The hull has only a very low displacement and is correspondingly "tippy" due to its proportions. Therefore, we also recommend this model for experienced modelers who have already gained experience with true-to-the-original RC model constructions.

Technical data Scale 1:60 Difficulty level construction: 4 (very experienced) Category: floor model (can be converted to RC) Length: 830 mm Material hull: wood Material superstructure: wood Fuselage construction: Frames

Scope of delivery: 1x kit side wheel steamer Building instruction

Accessories for the RC extension: 24531 RC expansion kit 67051 speed controller roF4076 Futaba remote control 6 channel 67201 UNO Switch for switching the lights LiPO drive battery 2S 7.4V (Determine size based on available space.) 79527 Charger 79505 Charging cable Connectors + 12V battery for lighting (LiPo battery 3S 11,1V)

Required colors: Primer Clear lacquer White Black Yellow Red Brown Brass colors

This product is manufactured by: Türkmodel B-6 blok no:49 Tekstilkent/Esenler Istanbul Türkei [email protected]

Responsible in the EU is: Klaus Krick Modelltechnik Industriestr. 1 75438 Knittlingen Deutschland [email protected]

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.