DryFluid DF021 DryFluid Skate Highspeed lubricant (10 ml)

DryFluid Extrem Skate - Innovative lubricant for ball bearings and shafts

The effect of DryFluid extreme Skate starts where other lubricants show their limits. Lowest sliding friction, highest speed effect and lowest dust and dirt binding were the main objectives in the development of this innovative fluid. The latest findings in aerospace and automotive engineering and the experience of performance-oriented skaters are the innovation sponsors of the new lubricant for shafts and bearings. What is DryFluid Extrem Skate? DryFluid Extrem Skate is more of a lubricant than a classic lubricant. It is the consistent application of technological research to the needs of the sports and leisure sector. DryFluid is not a wax, is non-oily, non-greasy and is free of silicones. The use of dry particles, sliding polymers and high-end lubricating fluids achieves an unprecedented lubricating effect without binding dust or dirt. The performance enhancing effect of DryFluid Extreme will inspire every skater. DryFluid Extreme Skate product features

• Lowest sliding friction for smoothness and the reduction of wear
• Reduces power loss on shafts and bearings
• Multi-stage lubricant system with immediate and long-term lubricating effects
• Does not bind dust and dirt
• Extremely good creep properties
• Highest material compatibility with all common metals, plastics and rubber materials
• Excellent adhesion and corrosion protection properties

The application of DryFluid Extreme Skate The main effect of DryFluid Extreme is the reduction of the sliding coefficient and thus the loss of force due to friction. An initial sparing application several times increases the long-term effect.

Clean shafts and bearings to be treated well and shake DryFluid bottle briefly before application to mix up the solid particles. Experience the speed effect after applying DryFluid Extreme !

Innovative highspeed lubricating fluid for shafts and bearings of inline skates and skate boards. Contains high performance lubrication components from aerospace technology. Increases the speed effect through extremely low sliding friction. Binds neither dust nor dirt. Excellent long-term lubrication effects. With fine dosing tip for pinpoint application. Content 10 ml

1. general data: Product name: DryFluid Skate Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.85 g/cm³ In the dry state: 1.06 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In the liquid state (20 degrees Celsius): 7.5 mPa s In dry state: Not determined

Temperature range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 1.2 x 10 E+3 Ohm x cm Total conductivity: > 1.5 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 270 N/mm².

Friction properties in ball/disc test:

Coefficient of friction : 0.13 Wear values : Ball: 57.6 microns Disc : 85.4 microns Testing institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films Test parameters: Test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (? 0.044 m/s), test duration = 60 min, friction distance = 158.4 m Disc: Material: 100Cr6, dimension: d = 5mm, ø = 35mm, surface finish: polished (Ra< 0,05 µm) Ball materials: 100Cr6