DryFluid DF081 DryFluid GlidePower XT Lubricating Fluid (25 ml)

Gliding with power The effect of DryFluid PowerGlide XT starts where other lubricants often show their limits. The enormously low friction created by the application allows things to glide in a way that was previously almost unimaginable, even for professionals. The long-term effect as well as the low dust and dirt binding were the most important target variables in the development of DryFluid GlidePower XT.

The extreme sliding effect is based on the most modern solid lubricants available, as well as additives that even enhance their effect. The lubricant components are liquefied with the aid of an alcohol, making them very easy to dose in the individual fields of application. After evaporation of the alcohol, which ensures very good creep properties, the high-end sliding film remains.

The main fields of application for GlidePower are industrial and workshop applications. However, the special features of this innovative lubricant are also evident in the household, hobby, sports and leisure sectors. Diversity in application Glide Power XT reduces frictional resistance and ensures absolute smooth running, even under extreme operating conditions. The Power Fluid eliminates squeaking, creaking, jerking and does so with an impressive long-term effect. The areas of application are plain bearings, ball bearings, guides, hinges, articulations, joints, shafts, rollers. Typical applications are machines, tools, chains, motor vehicles, locking systems, doors, drawers, garden tools, sports boats, bicycles. GlidePower for professionals:

• Lowest sliding friction even under extreme conditions.
• High creep
• Wear reducing
• Long-term lubricating effects
• Extremely high yield
• Water resistant
• Extremely pressure resistant
• Low tendency to bind dust and dirt
• High material compatibility with all common metals, plastics and rubber materials
• Excellent adhesion and corrosion protection properties

DryFluid GlidePower XT High-end lubricant for precision mechanical applications in the workshop, industrial and household sectors. Multi-stage lubricant system with long-term effects. Reduces frictional resistance and ensures absolute smooth running, even under extreme operating conditions. By using dry particles, sliding polymers and high-end sliding fluids, a previously unattained lubricating effect is achieved. Extremely pressure resistant and excellent adhesion. Very low tendency to bind dust and dirt. Especially suitable for shafts, joints, hinges, spindles, guides, rollers as well as plain and ball bearings. Typical applications are tools, milling and drilling equipment, motor vehicles, doors, drawers as well as sports and leisure equipment. Practical application bottle with fine dosing tip and separate extension cannula for pinpoint applications.

Content 25 ml

1. general data: Product name: DryFluid GlidePower XT Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.85 g/cm³ In the dry state: 1.06 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In the liquid state (20 degrees Celsius): 7.5 mPa s In dry state: Not determined

Temperature range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 1.2 x 10 E+3 Ohm x cm Total conductivity: > 1.5 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 270 N/mm².

Friction properties in ball/disc test:

Coefficient of friction : 0.13 Wear values : Ball: 57.6 microns Disc : 85.4 microns Testing institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films Test parameters: Test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (? 0.044 m/s), test duration = 60 min, friction distance = 158.4 m Disc: Material: 100Cr6, dimension: d = 5mm, ø = 35mm, surface finish: polished (Ra< 0,05 µm) Ball materials: 100Cr6