DryFluid Extreme RC Heli Lubricant (10 ml)

DryFluid Exteme Heli - Innovative lubricant for RC helicopters

DryFluid Extreme was specially developed for model helicopters with radio control with the aim of maintaining the functionality and service life of these mechanical marvels for as long as possible or to extend them significantly. The effect of the new lubricant for shafts, bearings, guides and ball connections starts where other lubricants show their limits. Lowest sliding friction, highest lubricating effect and lowest dust and dirt binding were the main objectives of the development. The latest findings in aeronautical and automotive engineering as well as the experience of RC heli pilots are the innovation sponsors of the new lubricant.

What is DryFluid Extreme Heli? DryFluid is more of a lubricant than a classic lubricant. DryFluid is not a wax, is non-oily, non-greasy and is free of silicones. By using dry particles, sliding polymers and high-end sliding fluids, an unprecedented lubricating effect is achieved without binding dust or dirt. The application and long-term effect of DryFluid Extreme will inspire every modeler.

DryFluid Extreme Heli product properties

• Reduces power losses of shafts, bearings and ball head systems and guarantees a long life of the treated components
• Lowest sliding friction for smooth running and reduction of wear and tear
• Multi-stage lubricant system with immediate and long-term lubricating effects
• Does not bind dust and dirt
• Extremely good creep properties
• Highest material compatibility with all common metals, plastics and rubber materials
• Excellent adhesion and corrosion protection properties

The application of DryFluid Extrem Heli The main effect of DryFluid Extreme is to reduce the friction and thus the wear of shafts, bearings, guides and ball-and-socket joints. The dry components used do not bind dust and dirt and guarantee optimum long-term lubrication effects. For the best possible effect, clean parts to be treated well and apply agent sparingly. Then allow the fluid to act for a few minutes. Repeated application increases the long-term effects. Shake bottle briefly and vigorously before use!

High end sliding fluid for ball systems, joints, shafts and bearings of RC helicopters. Contains high performance lubrication components from aerospace technology. Increases speed effect due to extremely low sliding friction. Does not bind dust or dirt. Excellent long-term lubrication effects. With dosing tip as well as separate fine dosing cannula for pinpoint applications.

10 ml content

1. general data: Product name: DryFluid Exreme Heli Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.80 g/cm³ In the dry state: 1.09 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In the liquid state (20 degrees Celsius): 2.5 mPa s In dry state: Not determined

Temperature range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 1.2 x 10 E+3 Ohm x cm Total conductivity: > 1.5 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 270 N/mm².

Friction properties in ball/disc test:

Coefficient of friction : 0.13 Wear values : Ball: 57.6 microns Disc : 85.4 microns Testing institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films Test parameters: Test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (? 0.044 m/s), test duration = 60 min, friction distance = 158.4 m Disc: Material: 100Cr6, dimension: d = 5mm, ø = 35mm, surface finish: polished (Ra< 0,05 µm) Ball materials: 100Cr6

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.