DryFluid DF073 DryFluid Extreme Gear Lube lubricant (10 ml)

DryFluid Extreme Gear Lube was specially developed for highly stressed gears in the model building sector. It is characterized by extreme compressive strength and excellent adhesion. Due to the use of solid lubricant components, it shows only a low tendency to bind dust and dirt. The main areas of application for the newly developed Gear Lube are gears of model helicopters, RC cars and trucks, model railroads and servos. Excellent also for shafts and cardan systems of any kind.

DryFluid Extreme Gear Lube is more of a lubricant than a classic lubricant. It is non-greasy, non-oiling and free of silicones. Through the use of dry particles, sliding polymers and extremely adhesive high-end lubricating fluids, it achieves previously unattained lubricating effects. Especially the long-term effect will inspire every modeler. Product properties at a glance:

• Inspiring lubricating properties
• Reduces power losses due to friction
• Reduces running noise
• Reduces wear
• Extremely pressure resistant
• Long-term stability
• Highest adhesion
• High material compatibility with metals, plastics and rubber materials
• Low tendency to bind dust and dirt

Application instructions: A thin layer of Gear Lube is sufficient for an extreme lubricating effect. If possible, apply on vertically positioned gear while rotating it. For hard-to-reach areas and spot applications, use the enclosed cannula. For fine and even distribution, use a fine hair brush to spread out the Gear Lube immediately after application. Gears that have not previously been treated with Gear Lube should be thoroughly cleaned before use. Shake well before use and apply sparingly!

High-end lubricant for highly stressed gears in the model building sector. Especially suitable for gearboxes of model helicopters, RC cars, trucks, model railroads and servos. Can also be used for shafts and cardan systems of any kind. By the use of dry particles, sliding polymers and high-end sliding fluids, a previously unattained lubricating effect is achieved. Extremely pressure resistant and excellent adhesion. Very low tendency to bind dust and dirt. Multi-stage lubricant system with long-term effects. With dosing tip, separate dosing cannula for pinpoint applications as well as fine hair brush for flat applications. Content 10 ml

General data: Product name: DryFluid Extreme Gear Lube Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.91 g/cm³ In the dry state: 1.18 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In liquid state (20 degrees Celsius): Not determined In dry state: Not determined

Temperature Range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 2.0 x 10 E+3 Ohm x cm Total conductivity: > 2.0 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 185 N/mm².

Coefficient of friction : 0.13