DryFluid Bike lubricant for chains (50 ml)

DryFluid Bike - Innovative lubricant for bicycle chains and shifting systems

The effect of DryFluid Bike starts where other lubricants show their limits. Findings from aeronautical and automotive engineering and the experience of performance-oriented cyclists are the innovation sponsors of the new biker lubricant for chain care. DryFluid Bike replaces chain oil and chain wax DryFluid Bike is a completely newly developed lubricant especially for bicycle chains which, thanks to its special properties, replaces all previous lubricants such as chain oil, chain wax or DryLube lubricants. Lowest sliding friction, long-term lubricating effects, smooth running and the low dust and dirt binding are the main arguments for the chain lubricant.

DryFluid Bike is neither a chain oil nor a wax? DryFluid Bike is more of a lubricant than a classic chain oil or chain wax. It is the consistent application of technological research to the needs of the sports and leisure sector. DryFluid is not a wax, is non-oily, non-greasy and is free of silicones. The use of dry particles, sliding polymers and high-end lubricating fluids achieves an unprecedented lubricating effect without binding dust or dirt. The performance-enhancing effect of DryFluid Bike will inspire every ambitious cyclist.

DryFluid Bike product properties

• Reduces the power loss of chains and shifting systems
• Lowest sliding friction for smooth running and reduction of wear and tear
• Multi-stage lubricant system with immediate and long-term lubricating effects
• Does not bind dust and dirt
• Extremely good creep properties
• Highest material compatibility with all common metals, plastics and rubber materials
• Excellent adhesion and corrosion protection properties

The application of DryFluid Bike The main effect of DryFluid Bike is the reduction of the sliding coefficient and thus the loss of power due to friction. An initial repeated sparing application increases the long-term effect.

Clean parts to be treated well and shake DryFluid bottle well before application to mix the solid particles. DRYFLUID - ENERGIZE YOUR BIKE Innovative biker lubricant for chains, shifting systems and cables. Contains high-performance lubricating components from aerospace technology. Binds neither dust nor dirt. Increases chain performance and reduces wear. High power efficiency due to extremely low sliding friction. Excellent long-term lubrication effects. With dosing pipette for pinpoint application. Content 50 ml

1. general data: Product name: DryFluid Bike Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.90 g/cm³ In the dry state: 1.15 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In the liquid state (20 degrees Celsius): 12 mPa s In dry state: Not determined

Temperature range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 2.0 x 10 E+3 Ohm x cm Total conductivity: > 2.0 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 185 N/mm². Friction properties in ball/disc test: Coefficient of friction : 0.13 Wear values : ball: 57.6 microns Disc: 85.4 microns Testing institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films Test parameters: Test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (? 0.044 m/s), test duration = 60 min, friction distance = 158.4 m Disc: Material: 100Cr6, dimension: d = 5mm, ø = 35mm, surface finish: polished (Ra< 0.05 µm) Ball materials: 100Cr6

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.