DryFluid DF031 DryFliud Extreme Slot-Cars Lubricant (10ml)

DryFluid Extreme Slot - Innovative lubricant for more speed and a long bearing life

DryFluid Extreme Slot was specially developed for track-guided model cars with the aim of increasing the speed performance of these small racers to an optimum. The effect of the new lubricant starts where other lubricants show their limits. Lowest sliding friction, highest speed effect and lowest dust and dirt binding were the main objectives of the development. The latest findings in aviation and vehicle technology and the experience of performance-oriented slot car drivers are the innovation sponsors of the new lubricant. What is DryFluid Extreme Slot ? DryFluid is more of a lubricant than a classic lubricant. DryFluid is not a wax, is non-oily, non-greasy and is free of silicones. By using dry particles, sliding polymers and high-end sliding fluids, an unprecedented lubricating effect is achieved without binding dust or dirt. The performance-enhancing effect of DryFluid Extreme will delight every slot car owner.

DryFluid Extreme Slot product properties

• Increases the performance of shafts and bearings
• Lowest sliding friction for smooth running and reduction of wear and tear
• Multi-stage lubricant system with immediate and long-term lubricating effects
• Does not bind dust and dirt
• Extremely good creep properties
• Highest material compatibility with all common metals, plastics and rubber materials
• Excellent adhesion and corrosion protection properties
• The application of DryFluid Extreme Slot

The main effect of DryFluid Extreme is the reduction of the sliding coefficient and thus of the performance losses due to friction. An initial 2-3 times sparing application increases the long term effect. Clean parts to be treated well and shake DryFluid bottle briefly before application to mix the solid particles. The dry components used do not bind dust and dirt and guarantee optimum long-term lubrication effects.

Experience the speed effect after applying DryFluid Extreme ! Innovative highspeed sliding fluid for shafts, bearings and gears of slot cars. Contains high performance lubrication components from aerospace technology. Increases the speed effect by extremely low sliding friction. Does not bind dust or dirt. Excellent long-term lubrication effects. With dosing tip as well as separate fine dosing cannula for pinpoint applications.

Contents 10 ml.

1. general data: Product name: DryFluid Exreme Slot Cars Color: Liquid state: whitish transparent Resting state: White

Density: In liquid state: 0.80 g/cm³ In the dry state: 1.09 g/cm³

Boiling point liquid: 82 degrees Celsius

Viscosity: In the liquid state (20 degrees Celsius): 2.3 mPa s In dry state: Not determined

Temperature range: Temperature resistance: - 50 degrees Celsius to 160 degrees Celsius. Recommended temperature range: - 20 degrees Celsius to 120 degrees Celsius Specific electrical resistance: Measurement in dry state according to DIN EN 50359 Microceramic component: 10 E+12 Ohm x cm Component plastic sliding polymer: 10 E+16 Ohm x cm Component sliding fluid: 1.2 x 10 E+3 Ohm x cm Total conductivity: > 1.5 x 10 E+3 Ohm x cm

2. lubricant properties: Compressive strength according to DIN 51347: 270 N/mm².

Friction properties in ball/disc test:

Coefficient of friction : 0.13 Wear values : Ball: 57.6 microns Disc : 85.4 microns Testing institute ball/disk test: Fraunhofer Institute for Surface Engineering and Thin Films Test parameters: Test load = 300 g, ball diameter = 5 mm, friction track diameter = 27 mm, speed = 30 min-1 (? 0.044 m/s), test duration = 60 min, friction distance = 158.4 m Disc: Material: 100Cr6, dimension: d = 5mm, ø = 35mm, surface finish: polished (Ra< 0,05 µm) Ball materials: 100Cr6