Kavan KAV9973.DE PRO superglue CA thin liquid 20g
4.50 €
Top thin superglue (cyanoacrylate adhesive) with a high strength for modeling, firm connection 1-5s, and also for general use. It comes in a bottle with a clog-proof application cap.
The thin superglue with a very low viscosity is ideal for bonding non-absorbent and absorbent materials that fit together perfectly - typical application is, for example, gluing RC car tires to rims. It glues wood, most plastics, metal, rubber, glass, ceramics, cork and paper.
Typical type of application: The glue is applied to the joint of perfectly aligned parts that are joined together.
Properties
- Color: clear
- Viscosity: 12-22 mPa.s
- Density: 1,04-1,06 g/cm³
- Optimum temperature for application: 25 °C
- Curing time (depends on temperature and type of materials bonded): e.g. nitrile rubber <5 seconds, stainless steel 15-20 seconds
- Full cure: 24 hours
- Minimum shear strength: 15-25 N/mm²
- Operating temperature range: -10 °C to +40 °C
- Max. Temperature range: -40 °C to +85 °C
- Optimum gap width between bonded parts: Zero
- The cured adhesive is soluble in: Acetone, dimethylformamide and acetonitrile.
Removal of excess undried adhesive: cloth or paper handkerchief moistened with acetone. (if the glued materials resist it).
Adhesive thinning: if the superglue becomes thicker, this is a sign that it has already partially polymerized and is losing its original properties - they cannot be reversed by any "thinning". If you need a "thinner" superglue, simply use the type with a lower viscosity. Individual types of KAVAN PRO superglues can be mixed together to achieve optimum viscosity.
Suitable for bonding: soft and hard wood, chipboard, plywood, metal, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers and many plastics (incl. EPP and EPO).
Unsuitable for bonding: of foamed polystyrene, polyethylene, Teflon and silicone.
Storage: In tightly closed packaging, cool, dry and dark (at temperatures between +2 °C to +10 °C). Do not expose the adhesive to temperatures below +2 °C.
Shelf life: If the conditions for proper storage are observed, we guarantee the shelf life in the original unopened packaging for a period of 1 year, maintaining the above product characteristics.
Package: 20g bottle
Signal word Caution
Hazard statements H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation.
Special labelling EUH202 Cyanoacrylate. Hazard. Adheres to skin and eyelids within seconds. Keep out of the reach of children.
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Kavan |
Customers who bought this item also bought
Activator spray for superglue CA 150ml
PRO Superglue CA medium liquid 20g
Fittings set with net for fishing boat Antje
Elastic ship coupling 3.2/4 to 4 mm
Epoxy-Rapid - 5 minutes epoxy resin 100g by R&G
Double rudder horn w.ball joint
SlowFlyer rudder horn 1.2 mm (3)
Mr. White Putty - putty 25g
UHU wood glue waterproof D3 without solvent bottle 75g
Bearing block for stern tubes VE2 4mm D
Fast'n EZ CA- rudder hinge light (12)
CfK carbon fiber round bar 1.8mm x 1000mm
Steel wire - spring steel 1.0mm x 1000mm
Dispensing needle for superglue (10)
Model Lite white 240ml light putty - DELUXE Materials
Filling powder for superglue CA 20g
Galleon Buccaneer 1:100 ship kit
White glue - dispersion adhesive 100g
Email me when available again
Nagler
Email me when available again
PRO superglue CA super thin 20g