Mr. Hobby MS231 Mr. Mark Softer - 40ml - Decal softener

Mr.Mark Softer is a plasticizer that is used for decals (slidemarks). It enables decals to be adapted to rough and curved surfaces. Application of Mr.Mark Softer First apply a small drop of Mr.Mark Softer with the brush on the bottle cap to the area where the decal is to be applied. Apply the decal to this area. Press the decal lightly with a soft cloth to remove excess liquid and ensure that the decal adheres quickly. The decal will adhere perfectly, even on uneven or curved surfaces. If there are air bubbles between the decal and the model surface, allow the decal to dry, then carefully pierce the decal with a needle and insert Mr.Mark Softer through the resulting hole. The air will escape and the decal will adhere to the surface of the plastic part.

Contents: 1x Mr. Mark Softer - 40ml - Decal softener

Signal word Danger

Hazard statements H225 Highly flammable liquid and vapor. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.